Modified RB300 & Goldring 1042

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Modified RB300 & Goldring 1042

I want to get my RB300 arm on my Rega Planar 3 modified by Origin Live and then fit a Goldring 1042.

Will I need a VTA adjuster fitted to the arm base get the 1042 catridge rake angle correct?

Anyone out there done it and got some advice/tricks on how best to do it?

:confused:
 
Dear Nanook

Re: "if my memory serves me correctly Goldring builds the Rega cartridges. THe Rega MM cartridges and the Goldring cartridges share the same body"

Have you ever seen these MM, Rega & Goldring, cartridges side-by-side? Or, even their pictures over the net? They do not bear any resemblance. Besides, the Rega has three holes for mounting and the Goldring has only two.

Please look at these cartridges at their respective websites -

Rega Cartridges -
http://www.rega.co.uk/index2.htm
Goldring 1042
http://www.phonophono.de/english/html/goldring_details_9.html


As far as height of the two series, Rega and Goldring 1000 series, are concerned, they are about the same and you'll not need any VTA adjustments.

IMO, if the prices are about the same or thereabout and you do not have to stretch too much, get the Dynavector DV105X (or whatever their #). Your MM phone stage can handle this cart as its a high output one and it'll, imho, give you better value for your hard earned $ then either the Rega or Goldring.

Cheers
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.