making a plinth for a commercial TT - diyAudio
Go Back   Home > Forums > Source & Line > Analogue Source
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 20th May 2002, 08:47 PM   #1
diyAudio Member
Join Date: Feb 2002
Location: Belgium
Default making a plinth for a commercial TT

I have a pioneer pl640 at home. This is a direct drive one, and I like the method. But....listening (realy listening instead of playing music) made me aware that there is quite a lot of noise going on. This seems to come from the "enclosure" of the TT. I took the whole thing apart, and there was not much. IMHO, using something else instead of plastic and 1mm steel would give a better result so I think I could make something better myself.

Big question, how do you proceed with something like this. I can take out the motor without any trouble, taking the arm out would not be much harder. But then, what measurements are important? Should they be exactly the same or is there any wiggle room? As for materials, something workable like wood?

Will this be a rewarding experiment or not? Can there be anything gained this way? Or do I better go the all way and go for the diy arm also?
  Reply With Quote
Old 21st May 2002, 01:08 AM   #2
dice45 is offline dice45  Germany
diyAudio Member
Join Date: Jan 2002
Location: Munich, Bavaria

1st, make sure the noise is not generated by the motor or the platter bearing (which usually is an integrated assembly with such TTs.) If bearing is noisy, do not put any effort into the unit.

stick with distance platter spindle <-> arm pivot, there is no wiggle within this dimension. You will not love to try out another cartridge and find the slotted holes of the headshell are too short now.
And please keep the tonearm's angular orientation towards the connecting line between spindle and arm pivot, otherwise the tonearm's antiskating will behave not like its scale predicts.

It is a design/beauty question whether you want the tonearm in parallel to plinth edges when tonearm is on its rest.

plinth: birch plywood, as thick as possible, no cavities except where needed. I would go with 2inch/50mm plywood atleast. Beech plywood also is an option, it has higher density but is not damped as well as the birch.

have fun with the sonic improvements. They should be considerable.
  Reply With Quote
Old 21st May 2002, 08:32 PM   #3
diyAudio Member
Join Date: Feb 2002
Location: Belgium
Ok, so the lines I started thinking in the mean time are fine. Thanks for the support. I'll check the motor/bearing. It is indeed one piece. Could not detect any play in them except axially. It will be a nice winter project.

After reading the diy arm thread, I think the ladegaards arm will be included. Looks great, does not require a large machine shop, and so much freedom.
  Reply With Quote


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Layered plinth for SP-10 jlsem Analogue Source 74 13th April 2009 10:48 PM
Thorens 124 Plinth Tee-Rex Analogue Source 8 1st March 2008 01:37 PM
A new plinth for an old turntable... simeon_noir Analogue Source 8 6th November 2007 08:38 AM
Plinth Design dude007 Analogue Source 10 1st August 2007 05:26 PM
My own TD-160 Plinth Story GhettoSQ Analogue Source 2 11th February 2007 10:09 PM

New To Site? Need Help?

All times are GMT. The time now is 04:40 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2