Created a website, at last! - diyAudio
Go Back   Home > Forums > Source & Line > Analogue Source

Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 5th June 2004, 06:46 PM   #1
JTT is offline JTT  United Kingdom
diyAudio Member
Join Date: Feb 2004
Location: SLOUGH
Default Created a website, at last!

My posting of an ancient MM phono preamp design a few weeks ago resulted in such an avalanche of e-mail requests that I concluded I must set up a better way of communicating. So, here it is:

Initial content includes the MM design, a modest battery powered amp for loudspeaker testing, an active sub-bass filter, and a general purpose balanced variable output power supply. The web pages give brief details, but there are zipfiles containing more detailed info, schematics, and PCB designs.

I also have details of the MC design by E H Nordholt and R M van Vierzen, first published in JAES April 1980 and summarised in Elektor magazine in the same year. I used this preamp in my vinyl setup for some years prior to my conversion to CDs, and it's performance was excellent. I can add nothing to the original, except a PCB design. But if there is genuine interest, I could add a copy of the Elektor article and the PCB design to my website.

Regards to all

  Reply With Quote


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
All car drivers are not created equal. bastek Multi-Way 13 21st August 2007 05:09 AM
Is all negative feedback created equal? jupiterjune Pass Labs 4 27th May 2007 12:19 AM
Created PCB layout in EAGLE. Whats Next? Killjoy99 Parts 13 29th September 2005 06:30 AM
What can be created of this? thanx Solid State 21 3rd June 2005 03:52 AM

New To Site? Need Help?

All times are GMT. The time now is 10:32 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.
Copyright 1999-2015 diyAudio

Content Relevant URLs by vBSEO 3.3.2