my DIY Turntables and DIY tonearm
:up: :nod: Why don't you put up a website and show this to the world?
A really good job!
How is the platter bearing made?
Very very nice looking ;)
very nice job, deserves something a liitle more special than the AT95E IMO, :) sreten.
My congrats! Excellent job, very stylish also!
Now a question: how yor platter is done - glued layers I guess, what kind of wood and glue? Glueing technics?
Glue is standard woodworking glue (Colle vinylique blanche) in french !:rolleyes:
ballasted with lead !
Weight of platter : 22 lbs
Weight of TT : 77 lbs
nice piece of work!
may i put your pictures and description on my diy turntable gallery (located at www.krishu.de)?
Would be really appreiciated!
you may also answer via email (button below)
The arm in details:
- PVC pressure Rings (yes yes! you read well...)
- Set screw stainless "machined" in points for the pivot
- Stopper of clock industry out of bronze bored very fine for the horological jewel and inserted in rings PVC
- Arrow tube aluminum for the arm
- the carry-cell "worked" in a piece of magnesium (1/3 of the weight of aluminium)
The rings with assembled pivots and horological jewels, the tiny trick that you see on the right of the set screw is a stopper of clock industry (My grandfather was a clock and watch maker...)
Wire of flexible wiring and very end bought in a retailer of electronic component of my area (did it find any more the reel, nobody any more does not ask any him...) 1 ml = 1,5 euros
I on kept well only 4 wire for the cell + 1 to connect the arm to the mass.
The mechanism of the arm:
- Counterweight of the threaded bored stainless arm
- Counterweight the antione out of stainless, aluminium pulley, the wire is a hair!
Details of the magnesium carry-cell equipped with a AT9E
The arm finished, finally almost...
|All times are GMT. The time now is 12:41 PM.|
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
Copyright ©1999-2016 diyAudio