diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Analogue Source (http://www.diyaudio.com/forums/analogue-source/)
-   -   Speed Problem (http://www.diyaudio.com/forums/analogue-source/35039-speed-problem.html)

EJCUSA1 30th May 2004 07:10 AM

Speed Problem
 
Hello all, I have the Kenwood KD-500. I'm noticing that at 33rpm's or 45 that the plater is drifting a little. Looking at the strobe afect on the side of the plater, the block will run smoth(stay in one spot) and then drift for a second and run smoth again. I've tried to adjust the pitch and I have cleaned the pods, but it's still doing it. Any idea's any one.... Thanks. Eric


All times are GMT. The time now is 03:07 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2