Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc.

SME 3009 rubber
SME 3009 rubber
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 17th May 2004, 12:04 PM   #1
turntableKid is offline turntableKid  Malaysia
diyAudio Member
Join Date: May 2004
Location: Between Thailand and Singapore
Unhappy SME 3009 rubber

Need to know where can I find a replacement rubber for my SME 3009 arm. Please help!

The rubber I am talking about is at the end of the arm, just a little small piece.

Million Thanks.
  Reply With Quote
Old 17th May 2004, 01:59 PM   #2
Brian Clark is offline Brian Clark  United Kingdom
diyAudio Member
Brian Clark's Avatar
Join Date: Nov 2003
Location: Ongar, Essex
Default SME SeriesII Rubber Coupling Renewal

If there is an official SME dealer or distributor in your region he MAY be able to help. Otherwise you will have to purchase directly from SME. Ask also for Service Sheet No. 25

I have recently posted on rubber coupling renewal over at The Vinyl Engine.


  Reply With Quote
Old 14th October 2004, 05:02 AM   #3
kevinkr is offline kevinkr  United States
diyAudio Moderator
kevinkr's Avatar
Join Date: Sep 2004
Location: Boston, Massachusetts
SME 3009 rubber
I had the same problem with my SME 3009 arm recently and early this week replaced the rubber bushings with new ones I got from the local rep. here in the US which is flat earth audio. In your case you may have to get them from SME directly. Note that there are two bushings on the MKII arm. It is pretty easy to replace them, I used 91% isopropyl alcohol to clean the pieces after I removed the old rubber bushings. (Small long tweezers really help for removing the bushing at the very end. ) Service sheet provides all the info needed. Make sure you understand the bushing orientations before you apply any superglue..
  Reply With Quote


SME 3009 rubberHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
SME 3009 Question lpd Analogue Source 10 14th July 2008 08:13 PM
SME 3009 II impro rewired marcanto Analogue Source 2 29th July 2005 01:12 PM
Garrard 301 Sme 3009 Diy martin Analogue Source 1 27th December 2004 08:22 PM
Rewire for SME 3009 II goberre Analogue Source 4 28th July 2004 05:52 PM

New To Site? Need Help?

All times are GMT. The time now is 03:06 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio