diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Analogue Source (http://www.diyaudio.com/forums/analogue-source/)
-   -   Replacing RCA cables on tech12's (http://www.diyaudio.com/forums/analogue-source/30628-replacing-rca-cables-tech12s.html)

silicuda 20th March 2004 09:25 PM

Replacing RCA cables on tech12's
 
I just replaced the RCA cables on my tech 12's but im not using the thick gauge cables that the turntables come with... I am using thinner gold plated RCA cables I got in the hardware store.

I doubt this is the proper solution for RCA cable replacement, so my question is "Is it important (if yes why?) to have the proper gauge RCA cable for the turntables?"

Thanks

Bill Fitzpatrick 20th March 2004 10:29 PM

It's not a question of gauge that is important, it's the adequacy of shielding and the cable capacitance. If it sounds good it's probably ok.


All times are GMT. The time now is 12:09 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2