Prototype(?) Peak T-001 tuner help needed. - diyAudio
Go Back   Home > Forums > Source & Line > Analogue Source
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 19th May 2016, 04:51 AM   #1
HyKlas is offline HyKlas  United States
diyAudio Member
 
Join Date: Mar 2014
Location: Southern California
Default Prototype(?) Peak T-001 tuner help needed.

I snagged this Chinese tube tuner from a thrift and need a little help with the circuit.

The pair of burnt resistors shown below are where my concern lies. The board says 150/5W but those are obviously a pair of 330Ω units. Taking a peek at the underside shows signs of what seems to be an attempt at tweaking that resistance from it's stated value. Obviously the caps in that part of the circuit took a hit as well.

I guess what I'm after here is a little hand-holding on where to take this thing. I'd like to get it going again seeing there may or may not be another one in existence.

If you need any more info, let me know. I'm not the sharpest tool when it comes to circuits but I do know where to find the hot end of a soldering iron.

For reference, this board uses a pair of Chinese 6N6 tubes.

Not sure how to post photos but here's some links to dropbox.


https://www.dropbox.com/sc/gbxvqg9ok...va3fuBfuHDEfia

https://www.dropbox.com/sc/bnox8l01z...peL2Z4rdiZE08a

Last edited by HyKlas; 19th May 2016 at 06:38 PM.
  Reply With Quote
Old 19th May 2016, 07:09 AM   #2
Mooly is offline Mooly  United Kingdom
diyAudio Moderator
 
Mooly's Avatar
 
Join Date: Sep 2007


Moved to Analogue Source.
__________________
-------------------------------------------------------
Installing and using LTspice IV. From beginner to advanced.
  Reply With Quote
Old 19th May 2016, 06:37 PM   #3
HyKlas is offline HyKlas  United States
diyAudio Member
 
Join Date: Mar 2014
Location: Southern California
Quote:
Originally Posted by Mooly View Post


Moved to Analogue Source.
Thanks much!
  Reply With Quote
Old 21st May 2016, 06:43 PM   #4
HyKlas is offline HyKlas  United States
diyAudio Member
 
Join Date: Mar 2014
Location: Southern California
No ideas on what wattage those resistors are? They're about half the size of the 150Ω 5W I got to replace them.

The pads were no good so I had to solder in some jumpers. Replaced all the caps with a lot higher quality units as well, mostly Panasonic 105C and Silmic IIs... Transistors in the area tested ok but new parts went in anyhow.

Guess we'll just bring it up and see what happens.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Spect output peak to peak for 807 SE ul walter807 Tubes / Valves 2 1st December 2010 12:24 PM
crossovers for seas w18ex-001&t25-001 tomes Multi-Way 1 23rd April 2010 10:13 AM
Basic tuner question, help needed! cchean Analogue Source 3 5th February 2010 03:24 PM
Sansui T-80 tuner, help needed. cchean Analogue Source 0 28th January 2010 01:09 AM
Help needed for JVC FX1100BK tuner earsandeyes Analogue Source 3 20th November 2005 10:06 PM


New To Site? Need Help?

All times are GMT. The time now is 08:06 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
Copyright 1999-2016 diyAudio

Content Relevant URLs by vBSEO 3.3.2
Wiki