Revox A77 locating the PS fuses

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Hello,

How do I get access to the power supply fuses? I don't know where the fuses are, other than the main fuse in the back panel.

I did not remove the wood case, these photos have been taken by the previous owner.

Thanks
 

Attachments

  • A 77 3.jpg
    A 77 3.jpg
    289.4 KB · Views: 244
  • A77 1.jpg
    A77 1.jpg
    308.3 KB · Views: 318
  • A77 2.jpg
    A77 2.jpg
    235.1 KB · Views: 309
A77 fuses and their locations

There are three fuses in the A77. Their locations are shown on a copy of one of the photos you submitted. FS101 is pretty clear – it is in a fuse holder right beside the mains voltage selector. FS102 and FS103 are harder to see in your photo, but they are on the power supply board. Fuse ratings are:

FS101: 0.5AT for 220v – 250v supplies, 1AT for 110v – 150v supplies

FS102: 630mAT

FS103: 2AT

A77%201%20v2.jpg
[/URL][/IMG]

The location of FS102 and FS103 is clearer in the photo of the power supply board; this diagram is taken from the A77 service manual.

1.077.540.jpg
[/URL][/IMG]

If you are going to be doing work on your A77 it would make sense to get your own copy of the service manual. This is a free download from Studer at this address:

ftp://ftp.studer.ch/public/products/Revox/Revox_A77/Manuals/Revox_A77_Serv.pdf

I hope this information will be a help to you.
 
Last edited:
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.