|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
14th January 2004, 06:16 PM
|
#1 |
|
diyAudio Member
Join Date: Apr 2003
Location: .
|
DIY tonearm for rebuild tt
Last year I've bought an old Thorens TD150 - it was completely ruined. Only platter and bearing was in good condition. I rebuild it and now tt consists of three independent blocks: motor, platter and tonearm. The new motor arrived from Scheu, tonearm is from Fonica. TT weights about 30kg. Now I`m working on a new unipivot tonearm. It`ll be something like 12 inch Clearaudio Unify, but I`m afraid it will wobble. Maybe oil or silicone bath will help?
Have anyone made similar tonearm ? Any suggestions are welcome. Regards, Tom |
|
|
14th January 2004, 07:44 PM
|
#2 |
|
diyAudio Member
Join Date: Apr 2003
Location: .
|
DIY tonearm for rebuild tt
An images of the rebuild tt are here:
http://www.icpnet.pl/~apteka/diygramofon.jpg http://www.icpnet.pl/~apteka/diygramofon2.jpg |
|
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Linear tracking tonearm vs. Pivoting tonearm | Don Nebel | Analogue Source | 1 | 4th November 2007 10:49 PM |
| Broken Tonearm: Stock Restore or Custom Rebuild?! | Sjögren | Analogue Source | 8 | 5th June 2007 12:04 AM |
| Help with amp rebuild | zeke | Tubes / Valves | 15 | 4th October 2004 01:39 AM |
| rebuild | offroadbum | Multi-Way | 2 | 25th February 2004 04:11 AM |
| HFT-90 anyone rebuild one before? | ajhawkins | Tubes / Valves | 10 | 12th July 2003 05:38 PM |
| New To Site? | Need Help? |
