Change a Motor on an RD 11s - diyAudio
Go Back   Home > Forums > Source & Line > Analogue Source

Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 15th May 2013, 12:19 AM   #1
diyAudio Member
 
soundchaser001's Avatar
 
Join Date: Oct 2007
Location: Kanata
Question Change a Motor on an RD 11s

Hi All;

Anyone here ever change a motor on an RD 11s? If so; were you able to remove the pulley adaptor by just heating it up?

Thanks

Matt
  Reply With Quote
Old 20th May 2013, 05:11 PM   #2
diyAudio Member
 
Arch Stanton's Avatar
 
Join Date: Mar 2012
I meen you speek about the Ariston RD-11s.
Can you send a photo of the pulley please ?
  Reply With Quote
Old 20th May 2013, 05:36 PM   #3
Mooly is online now Mooly  United Kingdom
diyAudio Moderator
 
Mooly's Avatar
 
Join Date: Sep 2007
If its anything like this it has a circlip securing it,#

Ariston RD 11 turntable motor and belt | eBay
__________________
-------------------------------------------------------
Installing and using LTspice. From beginner to advanced.
  Reply With Quote
Old 21st May 2013, 07:44 PM   #4
diyAudio Member
 
soundchaser001's Avatar
 
Join Date: Oct 2007
Location: Kanata
Thanks Mooly;

Thant's a great photo.

The clip/spring and a piece of felt secures the pulley to the adaptor with some pre-determined amount of "slip" however the adaptor is an interference fit onto the motor shaft. I have recently heard (on another forum) that it is possible to heat the adaptor with a blowtorch and ease the adaptor off of the shaft. It can then be heated and slipped onto another motor shaft and the pulley re-installed with the spring and clips.

Arch;

The photo Mooly sent from ebay is pretty much what I have however mine does not have the rear shaft support. I also have no knowledge if the pulley and adaptor are the same for an RD 11 and an RD 11s (they probably are). What I do know is that the Premotec motor I purchased is 300 RPM at 60Hz which is the same as the current motor and will work with the pulley I have. I just have to get the pulley adaptor off which based on the experience of someone on Canuck Audio Mart can be done. When I get around to doing (maybe in the next few weeks) I'll post whether or not it worked. I was also going to build a shaft support.

Thanks for the information.

Matt
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Compact Disc Motor and Turntable - Advices for Replace and Motor Service wanted tiefbassuebertr Digital Source 5 2nd August 2010 09:19 AM
Revive an Ariston RD-11S atavid Analogue Source 236 17th November 2009 10:37 PM
Lambda motor vs. XBL^2 motor vs. any other motor Thinkcat Subwoofers 16 23rd December 2008 06:23 AM
Sphinx Project 9 cd motor not running after laser change muizel Digital Source 26 29th January 2008 08:05 PM


New To Site? Need Help?

All times are GMT. The time now is 12:32 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2