michell gyro bearing - diyAudio
Go Back   Home > Forums > Source & Line > Analogue Source

Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 7th February 2013, 07:38 PM   #1
Bibio is offline Bibio  Scotland
diyAudio Member
 
Bibio's Avatar
 
Join Date: Mar 2009
Default michell gyro bearing

hello. does anyone know the hight of the bearing from the bottom of the plinth to the top of the bearing where the underside of platter surface rests on the gyrodec?

or if anyone has a complete bearing assembly at hand could they measure the hight from the bottom of the threads to the top surface where the platter rests not including the record/clamp spindle.

thanks
  Reply With Quote
Old 10th February 2013, 01:51 PM   #2
diyAudio Member
 
Join Date: Oct 2009
Location: Brunei
Just putting back together my gyrodec after international house move.

Bottom of bearing to platter rest: 53mm
Platter rest to lowest screw winding: 7mm
__________________
--------
TDA1541a-S2 / 6072a / MediaplayerDac -- Michell Gyrodec -- Aikido Preamp -- Pass F5 -- Audio Physic Tempo 2SE -- Yamamura Cabling
  Reply With Quote
Old 10th February 2013, 11:30 PM   #3
Bibio is offline Bibio  Scotland
diyAudio Member
 
Bibio's Avatar
 
Join Date: Mar 2009
thanks you studiostevus.

would the bottom of the bearing be to the top of the plinth or from the very bottom including the base screw (underside of plinth)?

Thanks
  Reply With Quote
Old 10th February 2013, 11:48 PM   #4
diyAudio Member
 
Join Date: Oct 2009
Location: Brunei
It's from the bottom (the lowest point) of the bearing, so below the plinth surface
__________________
--------
TDA1541a-S2 / 6072a / MediaplayerDac -- Michell Gyrodec -- Aikido Preamp -- Pass F5 -- Audio Physic Tempo 2SE -- Yamamura Cabling
  Reply With Quote
Old 11th February 2013, 12:15 AM   #5
Bibio is offline Bibio  Scotland
diyAudio Member
 
Bibio's Avatar
 
Join Date: Mar 2009
thank you very much studiostevus. the size is actually shorter than i thought which is great news.

Thanks again. wishing you a happy time in your new house.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Michell Gyrodec QC supply esl57 Analogue Source 1 24th April 2014 11:07 PM
Michell platter diameter phy1970 Analogue Source 1 23rd February 2012 01:14 AM
JA Michell Syncro TT dwk123 Swap Meet 2 1st April 2010 02:58 AM
My new Analog Rig - Michell Tecnodec Algar_emi Analogue Source 17 10th September 2008 09:07 PM
Michell DC motor type nige Analogue Source 7 6th December 2003 02:36 PM


New To Site? Need Help?

All times are GMT. The time now is 12:38 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2