Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc.

Balanced signal
Balanced signal
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 19th January 2013, 07:01 PM   #1
argonrepublic is offline argonrepublic  Canada
diyAudio Member
 
Join Date: Apr 2005
Location: Simcoe Ont
Default Balanced signal

I am just trying to fully understand this. My source is unbalanced, I use a line driver and send to an amplifier that has balanced in? Inside the amplifier, the signal becomes singal ended again. That results in a higher dynamic range?
I have been bouncing back and forth between active studio monitors and vintage home audio. I have run my active monitors with unbalanced signal and they lose alot of oomph. I like the sound of my Vintage hi-fi stuff and my Passive Morels, Vifas, Scan speaks. But I have never run them from a balanced signal because my home audio amplifiers are all -10 unbalanced.
I would like to use my hifi stuff but have a little more dynamics like my active monitors do. I don't expect to achieve all of each but the most I can get without taking out a second mortgage.
What is gain clone? I have scrolled past this a few times. Is there such a +4 balanced input amplifier DIY kit that I can use?
  Reply With Quote

Reply


Balanced signalHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Balanced Signal over 500 Metres! Samuel Jayaraj Analog Line Level 24 19th August 2012 12:52 PM
Way to get a balanced signal out of a PC? ribolovec2 PC Based 3 6th January 2012 04:54 PM
balanced signal gupsta Multi-Way 13 9th May 2008 11:06 PM
Balanced Signal Levels- voltages?? lgreen Parts 5 6th April 2004 04:22 PM
Balanced Signal Through Entire Amp? G-Daddy Solid State 7 11th March 2002 09:46 PM


New To Site? Need Help?

All times are GMT. The time now is 01:07 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki