My Lenco project finished!

dr.knibbeling · 18th November 2012, 05:43 PM

Hi guys,

After a few weeks hard labour, finally my DIY Lenco project is finished.
It is based on a Lenco B51 and a Lenco L75.
I will post some pcs here, but the full project is discussed on my (non profit) website:

Audio Creative - hifi zelfbouw, versterkers, luidsprekers, hifi & muziek recensies

enjoy!

SemperFi · 24th November 2012, 06:56 PM

Very nice. Here's what happened to my Lenco when I needed a chassis for a phono pre....

SCompRacer · 22nd December 2012, 03:39 AM

Nice job dr.knibbeling!

I finished my heavy platter Lenco L75 build in December 2011. It is a 120v 60Hz model with five hole metal idler. I upgraded the platter bearing with a larger Mirko stainless steel spindle and housing. I thought I was considered an extremist as I cut the top plate

but I see someone stuck tubes in one.

The tone arm is an Advanced Analog MG-1 linear tracking/air bearing. Compressor is in basement and hose is run through a push lock bulkhead fitting in wall plate.

a.wayne · 22nd December 2012, 03:45 AM

Damn ....sweet work guys .......

analog_sa · 22nd December 2012, 08:21 AM

Quote:

Originally Posted by SemperFi

Very nice. Here's what happened to my Lenco when I needed a chassis for a phono pre....

You realise you are going to Lenco hell, don't you

18th November 2012, 05:43 PM	#1
dr.knibbeling diyAudio Member Join Date: Sep 2004 Location: Goor	My Lenco project finished! Hi guys, After a few weeks hard labour, finally my DIY Lenco project is finished. It is based on a Lenco B51 and a Lenco L75. I will post some pcs here, but the full project is discussed on my (non profit) website: Audio Creative - hifi zelfbouw, versterkers, luidsprekers, hifi & muziek recensies enjoy!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Project finished, but still no cigar ...	eleson	Class D	5	7th May 2007 08:31 PM
Project Sub+Plateamp Finished	enter	Subwoofers	9	19th March 2006 08:23 PM
Finished my subwoofer project	pjpoes	Subwoofers	6	23rd January 2006 02:28 PM
finished project	leander	Solid State	18	28th November 2005 06:05 AM
Finished first speaker project!	Bikeman	Multi-Way	8	25th November 2003 05:52 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

22nd December 2012, 03:39 AM	#3
SCompRacer diyAudio Member Join Date: Jul 2005 Location: North IL	Nice job dr.knibbeling! I finished my heavy platter Lenco L75 build in December 2011. It is a 120v 60Hz model with five hole metal idler. I upgraded the platter bearing with a larger Mirko stainless steel spindle and housing. I thought I was considered an extremist as I cut the top plate but I see someone stuck tubes in one. The tone arm is an Advanced Analog MG-1 linear tracking/air bearing. Compressor is in basement and hose is run through a push lock bulkhead fitting in wall plate.

22nd December 2012, 03:45 AM	#4
a.wayne diyAudio Member Join Date: May 2008 Location: Front Row Center	Damn ....sweet work guys .......