diyAudio (
-   Analogue Source (
-   -   Sony TTS-3000 Project (

inrank 27th October 2012 06:11 PM

Sony TTS-3000 Project
Just starting a new project based around the main bits from a Sony TTS-3000.

So far, I have a Pioneer Arm:
Pioneer Arm by RSdesignUK, on Flickr

Its from a Pioneer C-4500 music centre (also a PL-12D and PL51A I believe) It has an effective length of 221mm and accepts aftermarket headshells.

And the Motor, Platter/Bearing and PSU from a Sony TTS-3000
Sony TTS-3000 by RSdesignUK, on Flickr

Idea is to keep it cheap and simple

Idea V1.1:
TT V1.1 by RSdesignUK, on Flickr
TT V1.1 by RSdesignUK, on Flickr
TT V1.1 by RSdesignUK, on Flickr

Basically a 2mm aluminium top plate to mount the bearing, motor and tonearm. I can get these made at work which helps.
There will be a bottom plate too with a plywood cylinder in between for the motor/bearing and tonearm.
I have also put in a decorative plinth to go around it, pure looks.

There will be some Sorbathane Feet under the TT part and just some spikes for the plinth.

With the platter:
TT V1.1 by RSdesignUK, on Flickr

nissen 1st January 2013 01:23 PM

sony tts-3000
Some news?

All times are GMT. The time now is 04:40 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.
Copyright 1999-2015 diyAudio

Content Relevant URLs by vBSEO 3.3.2