Hi all, If anyone is planning on building a turntable and requires parts PM me with what you need.
I have a number of motors for turntables and also a centre part that the records actualy sits on.
When I have time i will get some pics of motors and other bits.
Was gonna have a go myself but i have no records any more and when i tried a CD on a turntable it wouldnt play
I have a number of motors for turntables and also a centre part that the records actualy sits on.
When I have time i will get some pics of motors and other bits.
Was gonna have a go myself but i have no records any more and when i tried a CD on a turntable it wouldnt play
Another motor... A Sharp LLA6B01, again unused and working.
Found a centre spindle too.. the bit the record goes on. Its a triagular base with 3 holes for fixing down and has a part that slides on and spins.
Another Matsushita motor MMI-6A2RK Dated 25 Nov 86... unused and working 12v DC
Yet another Matsushita a MMT-8SF2H Dated 18 Sep 84 13.2v DC
PM me with ? or offers please.
Found a centre spindle too.. the bit the record goes on. Its a triagular base with 3 holes for fixing down and has a part that slides on and spins.
Another Matsushita motor MMI-6A2RK Dated 25 Nov 86... unused and working 12v DC
Yet another Matsushita a MMT-8SF2H Dated 18 Sep 84 13.2v DC
PM me with ? or offers please.
Quite possibly mate... i got stuff i dont have a clue about. Can you stick a picture of one up and i will have a look for ya.
Rick, This is what I have. I need a 1/4" bore pulley that will drive a 2 mm round belt.
Thanks.
Right... I have the spindle bit coming off the motor but the base is a triangle. Is that a relay in front.. got a few of them.
The base is round and the relay is in the front.
THanks.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Source & Line
- Analogue Source
- Anyone planning a turntable build