Does anyone know of a turntable plinth builder who can build one for the Dual EDS1000/EDS900 motors?
Nothing fancy, just a nice basic plinth that would allow a 9'' - 11" tonearm.
I have recently serviced 701 and 721 tables and would like to recycle the motor(s) if possible.
Nothing fancy, just a nice basic plinth that would allow a 9'' - 11" tonearm.
I have recently serviced 701 and 721 tables and would like to recycle the motor(s) if possible.
You have to receycle them. Or sending to me...
They are too good to throw away!
Diy it, its easy!
Have a look:
http://www.diyaudio.com/forums/anal...artest-product-diy-turntable.html#post3709548
They are too good to throw away!
Diy it, its easy!
Have a look:
http://www.diyaudio.com/forums/anal...artest-product-diy-turntable.html#post3709548
The Dual 701 etc is easy to use as a diy project. I did the one in the photo about a year and a half ago. It uses an Origin Live Alliance arm and is presently using an AT33PTG/II cartridge. Great sound, very stable and also incidently very heavy with the ceramic tile base and heavy wood plinth (yes it looks like stone, but isn't).
Attachments
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.