diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Analogue Source (http://www.diyaudio.com/forums/analogue-source/)
-   -   Cinch/RCA Sockets for thick Rear Panels (Record Player) (http://www.diyaudio.com/forums/analogue-source/212336-cinch-rca-sockets-thick-rear-panels-record-player.html)

tiefbassuebertr 8th May 2012 10:14 AM

Cinch/RCA Sockets for thick Rear Panels (Record Player)
 
I am looking for Cinch/RCA sockets for mounting in the wooden frame of a turntable (record player) like the Linn LP-12 (LP12).

I want to have such sockets in the kind like that one from follow URLs:
FURUTECH
http://www.wbt.de/index.php?id=49
http://www.cardas.com/content.php?ar...d=6&part_id=34

but suited for a greater strength of the wall thickness.

Who know the appropriate socket models ?

The Neutrik NF2D-B-2 could be suitable, but unfortunately the hole therefore is too large in diameter.

Until know the best solution I know is that one from post #4 about
http://www.diyaudio.com/forums/parts...ck-panels.html
but I would more like a socket with an extra long thread aera.

Thanks in advance for advices.

About
Linn LP12 Unpacking
you will find several images of such a wooden frame.

AndrewT 8th May 2012 10:37 AM

do without the sockets. Saves on adding extra connections. Use copper wire all the way from RIAA output devices to the plugs that enter the remote receiver.


All times are GMT. The time now is 08:48 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2