|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
28th March 2012, 11:56 AM
|
#2 |
|
diyAudio Member
Join Date: Sep 2003
Location: Paris - France
|
__________________
Did live about 10 years in Canada Back to France since the 1st February 2007. |
|
|
28th March 2012, 06:43 PM
|
#4 |
|
diyAudio Member
Join Date: Sep 2003
Location: Paris - France
|
manp111,
Not exactly only the screen S6 is connected to the chassis... The others are RCA in and out but insulated from the chassis Use models like those, good quality teflon insulated : http://www.partsconnexion.com/media/...NOTE-65201.jpg  Alain.
__________________
Did live about 10 years in Canada Back to France since the 1st February 2007. Last edited by Alain Dupont; 28th March 2012 at 07:02 PM. |
|
|
|
28th March 2012, 08:39 PM
|
#6 |
|
diyAudio Member
Join Date: Sep 2003
Location: Paris - France
|
manp111,
Yes all together and directly connected to the chassis... Regards Alain.
__________________
Did live about 10 years in Canada Back to France since the 1st February 2007. |
|
|
|
29th March 2012, 11:34 AM
|
#8 |
|
diyAudio Member
Join Date: Sep 2003
Location: Paris - France
|
manp,
Pin 6 is the shield of the transformer.... and the screen between primary and secondary -> You must connect it to the chassis It's to avoid incoming of RF frequencies into the chassis or the transformer. The chassis is like a faraday cage. Regards. Alain.
__________________
Did live about 10 years in Canada Back to France since the 1st February 2007. |
|
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY MC Cartridge | mlise | Analogue Source | 0 | 29th December 2011 06:41 AM |
| 1st MC cartridge | rednomad | Analogue Source | 9 | 8th April 2011 05:46 PM |
| Tango MC-5-250D choke | Foto | Swap Meet | 0 | 21st January 2010 12:49 AM |
| mini step up transformer wiring | mouldiwarp | Parts | 2 | 7th April 2009 10:50 AM |
| Wiring a Step Down Transformer for Isolation | ak_47_boy | Power Supplies | 6 | 24th June 2007 04:35 PM |
| New To Site? | Need Help? |
Tango MCT-999 MC Cartridge Step-Up Transformer Wiring Help
