diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Analogue Source (http://www.diyaudio.com/forums/analogue-source/)
-   -   Yamaha TX-500U tuner - transformer replacement (http://www.diyaudio.com/forums/analogue-source/207737-yamaha-tx-500u-tuner-transformer-replacement.html)

add595 28th February 2012 02:33 PM

Yamaha TX-500U tuner - transformer replacement
 
Hi all,

long time reader, first time poster.

I have just acquired two 80's digital tuners, an Onkyo T-4150 and a Yamaha TX-500U.

The Yamaha has a niggling fault that I am not sure if it needs attention or not. When switched off from the front panel switch, the transformer hums slightly. I have had it apart today and fitted rubber o-rings between the transformer and the chassis, which has minimized the audible noise to almost nothing.

My question is, is it worth changing the transformer, or is it nothing to worry about? If I were to change it is there anything I should know? It is a basic 240-18vac transformer, I have had a look on ebay and can get one for around 10-20.

Thanks in advance!


All times are GMT. The time now is 04:01 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2