|
Home | Forums | Rules | Articles | diyAudio Store | Blogs | Gallery | Wiki | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc. |
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
![]() |
|
Thread Tools | Search this Thread |
![]() |
#1 |
diyAudio Member
Join Date: Jan 2006
Location: Victoria, Australia
|
![]()
Not sure this is the right thread but it is titled Phono stage. I just built for a friend a tubecad two stage tube phono preamp. It uses two 12AX7s (I used gold pin Golden Dagrons) with a passive RIAA stage. I built the PS in one Hammond AL enclosure and preamp in another. The PS uses a 24VAC wall wart which is converted to 295V inside the PS by using a 240/24V step down tranni backwards. Two stage filtering C-R-C-R-C. The heaters run DC 12V.
The inter-stage caps in the preamp are Russian PIO and RIAA equalization caps Sprague Orange drops. Both PS and preamp are on Verobard. The preamp sounds excellent but only has sufficient gain for MM carts. You can switch between 100/47K loading.
__________________
| "Sanctum" - 12AU7 and 6AS7 direct coupled headphone amp | | "retro-Oatley 6J6" 6J6 push-pull headphone amp with OPTs | | "Mimic Carbon" - carbon resistors and PIO caps. MM phono preamp Last edited by mhouston; 26th December 2011 at 09:02 PM. |
![]() |
![]() |
#2 |
diyAudio Chief Moderator
|
Moved here from Daniel's thread.
![]() |
![]() |
![]() |
#3 |
diyAudio Member
Join Date: Jan 2006
Location: Victoria, Australia
|
|
![]() |
![]() |
Thread Tools | Search this Thread |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Tetra Phono Preamp as a DAC analog stage | regal | Tubes / Valves | 3 | 6th December 2009 03:41 PM |
Phono Stage for Arcam Preamp | fritz39 | Solid State | 1 | 27th October 2009 09:01 AM |
new phono stage or old preamp with phono? | flohmann | Analog Line Level | 2 | 2nd October 2008 09:51 PM |
IT WORKS! Tube Phono Stage | JesseG | Tubes / Valves | 33 | 3rd August 2007 08:47 AM |
tube phono stage | dsavitsk | Tubes / Valves | 10 | 15th December 2006 12:26 PM |
New To Site? | Need Help? |