Yaqin MS-12B output - diyAudio
Go Back   Home > Forums > Source & Line > Analogue Source

Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 13th November 2011, 11:37 AM   #1
diyAudio Member
 
Join Date: Dec 2005
Location: Plymouth, England
Default Yaqin MS-12B output

Can anyone tell me if the RIAA stage has enough drive to go straight to a line input on my Prometheus TVC? I don't need the CD input, and don't want the relay and all the connectors in circuit if possible. The emitter follower transistor is for reduced output impedance, I believe, so could I omit the 12AU7 section? There are two 1uf caps (one with the RIAA circuit, and one to block DC between the sections of the circuit, yes?) A good polyprop. in the first case (size), and PIO + teflon next is what I am planning; I have them, so I would like to try them. There is room for those if I remove the CD input /pre. out board. Also valve and resistor rolling. I will only be using the one output, and the other rear sockets will then be free for the phono input, and the front sockets for cartridge loading.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Yaqin MS 12B phono amp- reviews Zero One Analogue Source 105 7th July 2014 09:45 AM
Yaqin MS-20L tube recommendation cyto Tubes / Valves 4 25th April 2013 06:27 AM
Is the YAQIN MS-12B (220v +-10%) safe to use in UK eldarvanyar Tubes / Valves 6 1st October 2011 08:14 PM
yaqin MS-12B Search for Diagrams andersju Tubes / Valves 0 10th October 2010 07:04 PM
Help - MS-6V6 Yaqin schematic wfmali Tubes / Valves 5 6th April 2010 07:55 PM


New To Site? Need Help?

All times are GMT. The time now is 04:31 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2