Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc.

Seeking advice for my TT project
Seeking advice for my TT project
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 6th September 2003, 03:18 AM   #1
Dumbass is offline Dumbass  British Antarctic Territory
diyAudio Member
Join Date: Mar 2003
Location: British Antarctic Territory
Default Seeking advice for my TT project

I'm at a bit of a standstill with my TT project. Namely, I'm a little stuck on the Ladegaard arm. My methods are strictly kitchen-table.

When I take some more photos, I'll have some more specific questions, but in the meantime, feel free to check out progress so far on my progress page. Any constructive help would be appreciated.


Click the image to open in full size.
  Reply With Quote
Old 7th September 2003, 07:31 PM   #2
livemusic is offline livemusic  Israel
diyAudio Member
Join Date: Aug 2002
Location: israel
Default Headshell fixation

May I advise you to connect the headshell to armtube in more rigid way, for example, make the headshell from T-profile, cut the longitudinal slot in the tube (same width as a profile thickness) and insert the profile into in. Make sure the headshell is held firmly in the slot, and only AFTER that glue it with epoxy. The rigid connection is critical, and epoxy glue alone cannot provide it.
Good luck,
  Reply With Quote


Seeking advice for my TT projectHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Seeking Career Advice musgofasa Everything Else 9 8th January 2009 07:29 AM
Seeking amplifier kit advice which 1 to build? Stu_M Solid State 19 29th September 2007 12:09 PM
Help, serious newbie seeking advice!! redmagicsnake Solid State 1 21st November 2005 03:41 PM
Seeking Zen V7R/T and XBOSOZ advice. chemania Pass Labs 3 20th January 2005 06:43 AM
seeking advice on 16 ohm ATC Mid-Dome's and 21W/8554 scraggles Multi-Way 2 17th June 2003 08:05 AM

New To Site? Need Help?

All times are GMT. The time now is 07:37 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio