making sense of motor specifications making sense of motor specifications - diyAudio
Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc.

making sense of motor specifications
making sense of motor specifications
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 2nd February 2011, 05:47 PM   #1
lensmanMk2 is offline lensmanMk2  United Kingdom
diyAudio Member
Join Date: Nov 2008
Default making sense of motor specifications

well ive been ploughing through motor specs the past few days trying to find a replacement for my turntable and found one that might fit the bill, but im not 100% sure:

the only trouble is trying to make sense of the output on a working lt5V turntable motor

Vr pin: varies from 2.75v > 2.79v when speed is switched, then settles back to 2.75v irrespective of speed selected

C pin: varies from 1.40v > 1.43v when switched, then settles back to 1.40v irrespective of speed selected

feed voltage pin: 11.20v normal then swings upto 11.30 when switched, settles back to 11.20v irrespective of speed selected

this is crazy.. shouldnt at least one of these stay at a higher/lower value when the speed is switched? for example if one is the tacho feedback, and another the rpm adjuster? the schematics give tons of scope info for the tonearm, but nothing for checking the actual main drive motor

so does anyone out there have any idea how this motor can actually function.. and if so is it even possible to fit a new one into this existing circuit?

  Reply With Quote


making sense of motor specificationsHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Compact Disc Motor and Turntable - Advices for Replace and Motor Service wanted tiefbassuebertr Digital Source 5 2nd August 2010 09:19 AM
Lambda motor vs. XBL^2 motor vs. any other motor Thinkcat Subwoofers 16 23rd December 2008 06:23 AM
Linear voltage regulator: how to make good use of "sense" and "ground sense"? NeoY2k Analog Line Level 7 6th September 2008 11:35 PM
idiot needs help making sense of funny squigles - Filmosound atmars Tubes / Valves 15 20th June 2008 03:25 AM
Making sense of the Aikido calculations? Burnedfingers Tubes / Valves 154 19th November 2006 03:01 AM

New To Site? Need Help?

All times are GMT. The time now is 10:57 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio