Frank's diy Unipivot arm is about due ? - diyAudio
Go Back   Home > Forums > Source & Line > Analogue Source

Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 25th July 2003, 09:28 AM   #1
ktigerb is offline ktigerb  South Africa
diyAudio Member
 
Join Date: May 2003
Location: Durban
Talking Frank's diy Unipivot arm is about due ?

Hi Guys

If mem serves right Frank indicated publishing his Unipivot design around about now !!
How about it Fdegrove ???


regards
keith
__________________
Keith Birss
  Reply With Quote
Old 25th July 2003, 10:33 AM   #2
diyAudio Senior Member
 
fdegrove's Avatar
 
Join Date: Aug 2002
Location: Belgium
Hi,

Quote:
If mem serves right Frank indicated publishing his Unipivot design around about now !!
Hmmm...I don't remember that.

Anyway, if you have ideas for unipivot designs I'm willing to chip in.

Cheers,
__________________
Frank
  Reply With Quote
Old 28th July 2003, 08:44 AM   #3
ktigerb is offline ktigerb  South Africa
diyAudio Member
 
Join Date: May 2003
Location: Durban
Talking Sorry Frank was meant for EC8010

Hi Frank

My apologies my mistake this should have gone to EC8010.
Don't know his moniker .
Quote:
Unfortunately, I have rather a lot of other work to do, so I won't be able to devote the necessary time to doing arm drawings and writing explanations before June (this year). Please bear with me on this, it isn't a tease.
regards

keith
__________________
Keith Birss
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
My unipivot tonearm wmincy Analogue Source 18 20th September 2007 05:32 PM
Unipivot principle peterr Analogue Source 6 11th July 2006 04:19 AM
unipivot geometry IZHAKKATZ Analogue Source 22 6th October 2004 08:46 PM


New To Site? Need Help?

All times are GMT. The time now is 03:57 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2