diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Analogue Source (http://www.diyaudio.com/forums/analogue-source/)
-   -   Thinn high quality Audio cable wanted for Stereo Jack plug, 3.5mm (http://www.diyaudio.com/forums/analogue-source/179730-thinn-high-quality-audio-cable-wanted-stereo-jack-plug-3-5mm.html)

tiefbassuebertr 24th December 2010 08:58 AM

Thinn high quality Audio cable wanted for Stereo Jack plug, 3.5mm
 
I am looking for a top quality cable, suited for the small spaces in the solder aera of ordinary 3,5mm stereo jack plug like this:
RS | Connectors | Audio or Video | Jack Connectors | 3.5mm RS.
What is here a good choice ?

An another possibility is the use of 3,5mm stereo jack plug with more space in the solder aera - then I could find an appropriate cable much more easier. But I dont find such jack plug.
In the moment I use an adapter from 3,5mm plug for using 6,3mm plug versions, but I don't like that.
The distance between PC sound card and the amp input is approximately 10 meters, so the capacitance must be as low as possible and the quality of screen must be good at the same time.

Thank you for your hints in advance and merry Christmas

SGregory 24th December 2010 11:09 AM

Cardas intrerconnect wire

tiefbassuebertr 24th December 2010 11:51 AM

good advice - thank you
Cardas Audio

audiotux 26th December 2010 01:35 AM

Mogami 2791 , or 2520 or Mogami Mini Coax ,
the last 2 are not to find in Germany only in other
countries . 2520 was for Phono use and in the 90er
a Werbe-Dingens from Stereoplay .

Jürgen

SGregory 27th December 2010 01:43 AM

Their bulk chassis wire is also good for this application. 2x 2 conductor shielded.

tiefbassuebertr 27th December 2010 09:43 AM

Which of follow cable?
DIYCable.com : Intro » Home » Audio Cable » Bulk Cable » Cardas Cable

SGregory 27th December 2010 03:30 PM

I don't see what I was refering to on that site. GotTry this: Cardas Audio

3x20.5 awg twisted triad. Or similar.

10 M is a long way, do you have a buffer as I doubt the sound card has a low enough impedance to drive that much cable well even with a low capacitance.

tiefbassuebertr 27th December 2010 04:59 PM

Quote:

Originally Posted by SGregory (Post 2411881)
I don't see what I was refering to on that site. GotTry this: Cardas Audio

3x20.5 awg twisted triad. Or similar.

10 M is a long way, do you have a buffer as I doubt the sound card has a low enough impedance to drive that much cable well even with a low capacitance.

I don't know, what 3x20.5 awg (American Wire Gauge) means. How thick is the outer diameter of the whole cable?

SGregory 27th December 2010 09:04 PM

pretty thin stuff. the 2x21.5 with shield is only 2.5mm in diameter. I use that for sensitive internal cable.


All times are GMT. The time now is 09:18 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2