|Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc.|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|21st December 2010, 03:41 AM||#1|
Join Date: Aug 2010
Thorens TD 320 Power Supply
I just got a TD 320 with no wall wart. I have been unable to find a stick replacement on the internet. I was wondering if anyone knows the specs on this item. AC or DC, Voltage, amperage?
|17th January 2016, 12:15 PM||#4|
Join Date: Jul 2005
Location: D-55629 Schwarzerden
I have measured all voltages under the different modes (wall voltage was 233VAC).
1) off-mode: 18V6AC (same value also at disconnect AC plug)
2) ON, stop-mode: 18V0AC and 22V8DC behind rectifier
3) ON, play-mode: 16V5AC and 19V2DC behind rectifier (across the main capacitor 1000uF, 35V).
Now a question: For the motor control Unit No 214753 (PCB No 6 646 056) of the second version (Thorens TD320 MKII) I am looking for the schematic. This is different from the schematic of the first version - go to
Thorens TD320 Manual - 2-Speed Belt-Drive Turntable - Vinyl Engine
I need it to find out the reason for a burnt resistor, which is connected between the GND for motor control and the signal GND - go to
Who can upload the wanted schematic diagram ?
And what ist the actually aim of this resistor, which is not present at TD320' first version
Thank you very much.
Last edited by tiefbassuebertr; 17th January 2016 at 12:21 PM.
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Thorens TD-320 power connector socket||kora||Analogue Source||1||14th July 2008 07:27 AM|
|Thorens 320 spare part||otto||Vendor's Bazaar||0||7th August 2007 07:27 AM|
|Thorens TD-125 Mk II power supply||rmihai||Analogue Source||40||4th December 2006 12:18 AM|
|Thorens TD 320-service help required||andjur78||Analogue Source||2||9th June 2006 12:48 PM|
|New To Site?||Need Help?|