Dynalab FT 11

pat allen · 15th December 2010, 01:42 PM

Anyone would know where i could get the schematic of this tuner ?
i searched for a while for this one...thanks.

claudeb960 · 20th May 2012, 08:00 PM

Any luck in the search for the magnum dynalab ft 11 schematic?

I am seeking to do a DIY upgrade on the same. Thanks for any input!

pat allen · 21st May 2012, 12:48 PM

hi, nothing, niete, nada....ended up making my own mods, BB op amp, better power supply,...nothing fancy in there...hth..Pat

claudeb960 · 21st May 2012, 02:08 PM

Never did the op amp before - any part number and supplier that you recommend?

Thanks!

claudeb960 · 21st May 2012, 02:18 PM

It's something that I am very interesting in doing - thanks!

AVWERK · 21st May 2012, 10:17 PM

Does the FT 11 have dual outputs like the other FT series?
The reason I ask is my original FT 101 not the A version, had a irritating edge that got to you after about 30 minutes listening.
By replacing the output electrolytic on the low output side with a decent polyproplylene that edge went completly away.
Yeah a schematic on this one would be nice also and hope you find one for the FT11.

Regards
David

15th December 2010, 01:42 PM	#1
pat allen diyAudio Member Join Date: Dec 2004 Location: Quebec	Dynalab FT 11 Anyone would know where i could get the schematic of this tuner ? i searched for a while for this one...thanks. __________________ Electronic engineer for automotive market.

21st May 2012, 12:48 PM	#3
pat allen diyAudio Member Join Date: Dec 2004 Location: Quebec	hi, nothing, niete, nada....ended up making my own mods, BB op amp, better power supply,...nothing fancy in there...hth..Pat __________________ Electronic engineer for automotive market.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CD80 clock frequency 11.2896 to 11.0592?	Sam Spade	Digital Source	5	24th October 2010 03:44 PM
WTB - Russian FT-1/FT-3 capacitors	lil' knight	Swap Meet	1	1st September 2010 05:06 PM
free 11 by 11 inch heatzinc good for class a	karma	Swap Meet	9	14th January 2007 02:30 AM
dynalab 8 inch speakers. Need T/S paramertes	MUPASTHECH	Subwoofers	0	22nd July 2005 07:42 AM
woofer in 11 liter (0.38 cu ft)	rwagter	Multi-Way	3	4th May 2004 08:12 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

20th May 2012, 08:00 PM	#2
claudeb960 diyAudio Member Join Date: Oct 2011	Any luck in the search for the magnum dynalab ft 11 schematic? I am seeking to do a DIY upgrade on the same. Thanks for any input!

21st May 2012, 02:08 PM	#4
claudeb960 diyAudio Member Join Date: Oct 2011	Never did the op amp before - any part number and supplier that you recommend? Thanks!

21st May 2012, 02:18 PM	#5
claudeb960 diyAudio Member Join Date: Oct 2011	It's something that I am very interesting in doing - thanks!

21st May 2012, 10:17 PM	#6
AVWERK diyAudio Member Join Date: Jan 2004 Location: OC,Calif.	Does the FT 11 have dual outputs like the other FT series? The reason I ask is my original FT 101 not the A version, had a irritating edge that got to you after about 30 minutes listening. By replacing the output electrolytic on the low output side with a decent polyproplylene that edge went completly away. Yeah a schematic on this one would be nice also and hope you find one for the FT11. Regards David

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)