|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
1st November 2010, 07:10 AM
|
#1 |
|
diyAudio Member
Join Date: Nov 2008
|
Yamaha PX-2
Finally got the Headshell & Cartridge together for the PX-2 except the buttons on the right board don't work, left & right, up & down, cut & play disc size etc. I've sprayed Isopropyl Alcohol on the buttons with the board removed but nothing. I replaced the belt that goes from the motor to belt drive & tone arm moves fine but only when i push it then it moves all the way across i guess because the left board is faulty & it dosen't know what disc size etc or the circuit isn't complete. Have you had similar problems? The mechanical side of the Tonearm is fine, does anyone have a spare board for the 9 buttons on the right? Replace the IC294?
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Yamaha PX-2 IC needed | steelyjoe | Parts | 1 | 11th September 2010 10:31 AM |
| TEAC PX-300/PX-500 Turntables HELP! | rayr20683 | Analogue Source | 2 | 18th February 2009 10:04 PM |
| WTB headshell, Yamaha PX-3/PX-2 | pfcs49 | Swap Meet | 0 | 24th January 2009 03:37 PM |
| Aiwa PX-E850 platter | ukplc | Analogue Source | 3 | 6th November 2008 02:16 PM |
| plextor px-premium | Williams Audio | Digital Source | 9 | 5th May 2006 03:33 PM |
| New To Site? | Need Help? |
| Page generated in 0.06651 seconds (63.33% PHP - 36.67% MySQL) with 10 queries |
