|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
23rd September 2010, 03:35 PM
|
#1 |
|
diyAudio Member
Join Date: Sep 2010
|
Help with soldering Y cable
Hi,
I want to make audio cable to connect my laptop to my receiver... So... Please help me.. how can i solder 1/8 connector to 2 rca connectors...? What cable should i use? I saw various guides to solder rca-rca cable but not even 1 that shows you how to make Y cable... Can you find me this guide or just explain it to me..? Thanks! |
|
|
25th September 2010, 01:55 AM
|
#2 |
|
diyAudio Member
Join Date: Sep 2002
Location: Lakewood, Ohio
|
It's probably easier to join three cables than to attach multiple wires in a connector. Find a reasonable cable with the correct 1/8 inch connector and a RCA to RCA cable. Is this mono or stereo? In any case, cut the RCA to RCA in half. Cut the 1/8 to a handy length. The 3 shields are connected together. If mono then the 3 center conductors are connected together. If stereo, one of the two 1/8 center leads goes to one RCA and the other center conductor goes to the other.
__________________
Kevin |
|
|
|
25th September 2010, 05:08 AM
|
#3 | |
|
diyAudio Member
Join Date: Nov 2009
Location: Los Angeles
|
Quote:
Audio Cables - RCA / 3.5mm If that is the case, why bother to duplicate a 65 cent cable? G² |
|
|
|
|
25th September 2010, 09:18 AM
|
#4 |
|
diyAudio Member
Join Date: Sep 2010
|
I need something like that:
http://www.iphoneware.com/pro_images..._8482__413.jpg But the distance between my laptop and my receiver is about 15ft... So i need HQ cable.. |
|
|
|
25th September 2010, 02:19 PM
|
#5 | |
|
diyAudio Member
Join Date: Nov 2009
Location: Los Angeles
|
Quote:
G² |
|
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Soldering a tonearm cable - grounds | 355F1 | Analogue Source | 2 | 9th March 2008 06:18 PM |
| soldering headphone cable | meaghers | Headphone Systems | 4 | 20th November 2006 11:48 PM |
| Question about soldering the balanced interconnect cable | rnzr | Analog Line Level | 7 | 19th September 2006 01:24 PM |
| soldering hifi speaker cable into 1/4 plug | saifq | Multi-Way | 3 | 19th June 2005 08:48 PM |
| New To Site? | Need Help? |
| Page generated in 0.08703 seconds (72.04% PHP - 27.96% MySQL) with 10 queries |
