Help with LINGO power supply

esprit · 19th September 2010, 11:56 AM

During transit of LP12, some of the connections on the LINGO to LP12 power lead have become detached at the LP12 end. I still have some leads attached, which are from one end = BROWN, BLACK, RED. WHITE still in situ at the other end. The rest, I have lost the orientation, can anyone help!!!.
esprit.

zzaudio · 28th October 2010, 05:21 PM

Hello esprit, my first post.
From bearing:
motor blue: brown
motor com: black
motor red: red
green led: violet
red led: yellow
led comm: green
switch: blue
+5: white
Hope this help
Regards
Luca

19th September 2010, 11:56 AM	#1
esprit diyAudio Member Join Date: Mar 2010	Help with LINGO power supply During transit of LP12, some of the connections on the LINGO to LP12 power lead have become detached at the LP12 end. I still have some leads attached, which are from one end = BROWN, BLACK, RED. WHITE still in situ at the other end. The rest, I have lost the orientation, can anyone help!!!. esprit.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY Audio Alchemy Power Station 2 Power supply PSU with case	roscoeiii	Swap Meet	2	29th May 2010 06:51 PM
Lingo pcb connections	el-folie	Analog Line Level	0	20th August 2006 10:52 PM
Lingo schematic	resolution	Analogue Source	8	19th January 2005 03:56 PM
heater supply (xformer specs are 6.3V 2.5A) as supply for a power LED?	jarthel	Tubes / Valves	10	21st July 2003 01:30 PM
New Lingo	pk386	Everything Else	2	13th February 2003 06:01 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

28th October 2010, 05:21 PM	#2
zzaudio diyAudio Member Join Date: Jan 2009	Hello esprit, my first post. From bearing: motor blue: brown motor com: black motor red: red green led: violet red led: yellow led comm: green switch: blue +5: white Hope this help Regards Luca

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)