Dynavector 505 arm lift

marknoir · 21st July 2010, 10:34 PM

Looking for an arm lift for Dynavector 505 or a good close ups of it (will possibly build my own)

Thanks

Panicos K · 26th July 2010, 11:06 PM

Quote:

Originally Posted by marknoir

Looking for an arm lift for Dynavector 505 or a good close ups of it (will possibly build my own)

Thanks

The 505 is a nice tonearm.I would recommend that you order a new arm lift from the distributor.It shouldn't cost you more than 60-70 dollars.

marknoir · 27th July 2010, 12:14 AM

Quote:

Originally Posted by Panicos K

The 505 is a nice tonearm.I would recommend that you order a new arm lift from the distributor.It shouldn't cost you more than 60-70 dollars.

Supply of those armlifts has been depleted a long time ago. The last one I saw for sale (on German Ebay) went for over US$200...

M

AVWERK · 27th July 2010, 01:30 AM

This was always an interesting design. There is a anti resonant spring and bob mechanism in the arm that cancels arm/tonearm resonances to no more than 2db. This would have to get you the best bass response in the business

The only downside was perfectly flat records are required because of the short arm sub assembly. A vacuum platter no doubt.

hope you find what it needs

Regards
David

21st July 2010, 10:34 PM	#1
marknoir diyAudio Member Join Date: Feb 2005 Location: Brooklyn, NY	Dynavector 505 arm lift Looking for an arm lift for Dynavector 505 or a good close ups of it (will possibly build my own) Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: Tonal Arm Lift	robertjwarren	Swap Meet	1	5th February 2011 06:14 AM
tone arm lift	woodturner-fran	Analogue Source	33	30th March 2010 06:59 AM
repairing an old Dual 505 arm/headshell	jives11	Analogue Source	1	8th February 2009 03:27 PM
dynavector DV 505	luigilamarca	Vendor's Bazaar	0	10th January 2008 01:52 PM
Arm lift and other accessories	AuroraB	Analogue Source	1	19th August 2003 11:55 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

27th July 2010, 01:30 AM	#4
AVWERK diyAudio Member Join Date: Jan 2004 Location: OC,Calif.	This was always an interesting design. There is a anti resonant spring and bob mechanism in the arm that cancels arm/tonearm resonances to no more than 2db. This would have to get you the best bass response in the business The only downside was perfectly flat records are required because of the short arm sub assembly. A vacuum platter no doubt. hope you find what it needs Regards David

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)