|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc. |
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
|
![]() |
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
diyAudio Member
Join Date: Oct 2009
|
Dear all,
I have a buzz problem with my cartridge caused by my cd-player when my cd-player is powered on. The whole story and the steps taken to identify the affected part is here: Marantz cd600ose hum/buzz for anyone who has some time to read. (thanks to all guys replied there) Long story short: I have a Rega P3 (2000) TT with a Rega Super Elys cart on it. Also have a Marantz CD6000 OSE cd-player. When the cd-player is powered on and the amplifier selected source is the phono inputs i can hear annoying buzz coming from my speakers. This only happens only if the cd-player is powered on and i have to mention that no other device in my setup causes a similar effect to my TT cartridge. Is there a way to solve this problem? I checked the TT grounding thoroughly and even the headshell and the cartridge screws appear to be properly grounded through the TT ground wire. Have to mention (if it plays* any role) that time ago i have replaced the original Rega cabling (which grounds the TT through the Left- terminal of the interconnect), with some other continuous-run phono cable which has separate wire for the ground (L+ L- R+ R- and ground wire). best regards. Last edited by safe1; 1st June 2010 at 11:32 PM. |
|
|
|
#2 |
|
diyAudio Member
|
I don't think it's a grounding issue. More like RFI leaking from the CD player and disturbing the cartridge. Try moving the CD player away, does the noise go away or decrease? If so, better filtering in the CD player and shielding its insides (with the kind of aluminum they use for tuners) will help.
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Got the speaker buzz | genmin | Everything Else | 5 | 13th December 2009 10:19 AM |
| DCX2496 buzz | gunwoo | Digital Line Level | 0 | 14th September 2009 12:00 AM |
| Melos triode and computer as source: BUZZ BUZZ BUZZ | zigo3 | Tubes / Valves | 4 | 28th November 2007 02:11 AM |
| Can you help with my Buzz?? | saurus | Solid State | 4 | 23rd September 2004 03:31 PM |
| A-75 buzz | Dave Varner | Pass Labs | 3 | 15th February 2002 01:30 PM |
| New To Site? | Need Help? |
| Page generated in 0.08909 seconds (72.84% PHP - 27.16% MySQL) with 10 queries |