Carbon top plate for LP12 - diyAudio
Go Back   Home > Forums > Source & Line > Analogue Source
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 6th May 2010, 01:41 PM   #1
diyAudio Member
Join Date: Feb 2006
Location: On a hill, in a wooden shack, next to the woods, in Somerset.
Default Carbon top plate for LP12

Hi everyone

Just to let you know that I am doing a carbon top plate for the LP12 and have put a few seconds on Ebay to bring the price more in reach of the DIY community. The retail price of these is 295 but the seconds are on there at 135. I am also doing a carbon and structural foam subchassis and a similar construction armboard.

This post is to offer a 10% discount to DIY audio members on these and the armboards. Those who want to buy the subchassis or the full price top plate can have a 20% discount on advance orders. I will have to reduce this in due course but it will stand for at least a month.

I will try to encourage those that already have the components to contribute their opinions to the forum.

Hope this is of interest.

  Reply With Quote
Old 9th May 2010, 02:53 PM   #2
diyAudio Member
Join Date: Feb 2006
Location: On a hill, in a wooden shack, next to the woods, in Somerset.
I have just been asked by someone whether, if they like the top plate and want to change their 'second' for a new 'first' would I take the other one back? The answer is yes, that I will give a full credit of whatever was paid to begin with. The forum discount would then apply after that.
  Reply With Quote


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Anyone have a diagram of the Linn top plate? adhoc Analogue Source 25 1st January 2012 01:09 AM
Modifying speaker stand top plate loop7 Construction Tips 3 13th February 2010 06:51 PM
Turntable aggresive sound, top plate? iain Analogue Source 10 31st May 2007 04:03 PM
1/8" Aluminum for top plate? Sherman Tubes / Valves 23 10th January 2005 03:04 PM

New To Site? Need Help?

All times are GMT. The time now is 02:14 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2