djn! Thanks for your reply!! I'll start the modifications soon. Should be a fun winter project. I'm going to lengthen it to at least 12 inches, maybe a little more. BTW I love your work, especially the turntable!
lausar,
Thanks!!
lausar,
Where did you find that cutting board? I would love to try that too for a similar project.
Thanks!!
Too bad this thread died an early death...
I previously built a Baltic birch plinth for my 301 and recently found an 8 by 4 sheet of a much better quality plywood.
My plan is to cnc mill a 6mm aluminum top plate followed by 3 sheets of BB then a layer of acrylic, followed by 3 more sheets of BB and then a final sheet of 6mm Aluminum.
I previously built a Baltic birch plinth for my 301 and recently found an 8 by 4 sheet of a much better quality plywood.
My plan is to cnc mill a 6mm aluminum top plate followed by 3 sheets of BB then a layer of acrylic, followed by 3 more sheets of BB and then a final sheet of 6mm Aluminum.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.