|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc. |
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
![]() |
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
diyAudio Member
Join Date: Jul 2005
Location: D-55629 Schwarzerden
|
Who have heard this Yamaha Phono Preamp?
http://www.thevintageknob.org/YAMAHA...0/HX10000.html YAMAHA ƒtƒHƒmƒCƒRƒ‰ƒCƒUHX-10000‚ÌŽd—l ƒ„ƒ}ƒn http://www.audiostereo.pl/Yamaha_czy...aki_33014.html http://3rd.geocities.jp/yosikotue/newpage61.html http://home.j08.itscom.net/studio-k/.../myaudio4.html (scoll down) Last edited by tiefbassuebertr; 24th February 2010 at 01:22 AM. |
|
|
|
#2 |
|
diyAudio Member
Join Date: Jan 2006
Location: Johannesburg, South Africa
|
Never seen that before. The MC noise figure is quite impressive.
__________________
Steerpike's Toybox |
|
|
|
#3 |
|
diyAudio Member
Join Date: Apr 2007
|
The manufacturer either has access to lower noise transistors than I have seen or has screened devices to get those with the best noise figures. I can believe that by going 2 sigma out on the distribution curve that it's possible to get an En that is 50% that of typical. If they used 2SJ74/2SK170 devices and paralleled them they might get En down below 0.1 nV/sqrt(Hz), which is approximately what they would need to get ~95 dB SNR for 500 uV. BTW, I am assuming the 500 uV is applied at 1.0 KHz. Does anyone know for sure?
__________________
JCM |
|
|
|
#4 | |
|
diyAudio Member
Join Date: Dec 2002
Location: Vienna, Austria
|
Quote:
cheers Uli
__________________
![]() 'Jazz is not dead, it just smells funny' F.Zappa |
|
|
|
|
#5 |
|
diyAudio Member
Join Date: Apr 2007
|
Uli,
Thanks for the additional information. Do you know what the parameteic differences are between those transistors and the 2SJ74/2SK170? Also, it would be interesting to get SPICE models for the devices Yahama is using.
__________________
JCM |
|
|
|
#6 | ||
|
diyAudio Chief Moderator
|
Quote:
Quote:
|
||
|
|
|
#7 |
|
diyAudio Member
Join Date: Jul 2005
Location: D-55629 Schwarzerden
|
Is this model really extremly rare ?
|
|
|
|
#8 |
|
diyAudio Member
Join Date: Apr 2011
Location: Yorktown Virginia
|
I have never seen one in the States. In fact I have never seen an advertisement for one of these. I am going to do some research.
|
|
![]() |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Chip Amp based on the topologies from Yamaha MX-10000 and Quad 405 | tiefbassuebertr | Chip Amps | 2 | 28th April 2011 01:32 PM |
| Ultimate Integrated Amp - Logical Wings Miracle Drive "USO800-Pro", who have heard ? | tiefbassuebertr | Solid State | 1 | 24th November 2010 05:51 PM |
| Yamaha Nsx 10000 | stewartwen | Multi-Way | 1 | 18th December 2006 12:12 PM |
| Ultimate Tube head phone amp. | tube-lover | Tubes / Valves | 14 | 13th July 2005 04:25 PM |
| Ever heard of an amp bypassing remote from the head unit? | MrBig | Car Audio | 5 | 8th June 2004 12:10 PM |
| New To Site? | Need Help? |