240/300 Ohms balanced IEC FM-Plug for flat Dipole Wire and for Disass'y e. g.Quad FM3 - diyAudio
Go Back   Home > Forums > Source & Line > Analogue Source

Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 14th February 2010, 01:50 PM   #1
diyAudio Member
 
tiefbassuebertr's Avatar
 
Join Date: Jul 2005
Location: D-55629 Schwarzerden
Default 240/300 Ohms balanced IEC FM-Plug for flat Dipole Wire and for Disass'y e. g.Quad FM3

on the attachment you will see an indoor fm antenna with solid connector in this kind. and female connectors by two different fm tuners
By the supplier Altai/Electrovision such connector was easy to get separate some years ago (FM Plug "F-264" F264), but now this device is no longer available there.

Who knows a supplier of this male IEC FM flat dipole connector as separate device for disass'y and the commonly english keyword therefore?

Last edited by tiefbassuebertr; 14th February 2010 at 01:54 PM.
  Reply With Quote
Old 14th February 2010, 01:52 PM   #2
diyAudio Member
 
tiefbassuebertr's Avatar
 
Join Date: Jul 2005
Location: D-55629 Schwarzerden
here the attached pictures
Attached Images
File Type: jpg 240-300 Ohm IEC FM Dipol plug.jpg (14.0 KB, 111 views)
File Type: jpg 300 Ohm Dipol plug + FM antenna.jpg (53.3 KB, 97 views)
File Type: jpg 240-300 ohms antenna jack Dual CR-230.jpg (60.8 KB, 101 views)
File Type: jpg 240-300 ohms plug Quad FM-3.jpg (42.6 KB, 97 views)
File Type: jpg Quad fm3 inside .jpg (97.1 KB, 96 views)
  Reply With Quote
Old 14th February 2010, 04:31 PM   #3
diyAudio Member
 
tiefbassuebertr's Avatar
 
Join Date: Jul 2005
Location: D-55629 Schwarzerden
The mentioned connector was often called "IEC" but the correct designation is "DIN 45316" (DIN45316) for FM (and I want to buy) and the counterpart DIN 45315 for AM (I don't need)
Attached Files
File Type: pdf 300 Ohm Dipol Stecker DIN45316.pdf (46.2 KB, 42 views)

Last edited by tiefbassuebertr; 14th February 2010 at 04:34 PM.
  Reply With Quote
Old 21st February 2010, 11:45 AM   #4
burbeck is offline burbeck  United Kingdom
diyAudio Member
 
Join Date: Aug 2004
Location: Ratae Coritanorum
hi
how about this look at the whole page

http://search.dse.com.au/electronics/300%20Ohm
__________________
regards
bob
  Reply With Quote
Old 21st February 2010, 11:54 AM   #5
diyAudio Member
 
tiefbassuebertr's Avatar
 
Join Date: Jul 2005
Location: D-55629 Schwarzerden
Quote:
Originally Posted by burbeck View Post
hi
how about this look at the whole page
300 Ohm | Dick Smith Online Store
Yes, this is the connector I want - thank you. Also the other devices from there are of interest.
Plug 300 ohm Screw Terms 3mm (P2084) | Dick Smith Online Store

Last edited by tiefbassuebertr; 21st February 2010 at 12:06 PM.
  Reply With Quote
Old 3rd July 2014, 09:43 AM   #6
diyAudio Member
 
Join Date: Jul 2014
The DIN45316 FM 300 Ohm plug is not availible at Dick Smith Online Store anymore, does anyone know if it is availible at other stores?

Alternativly I can made the pins myself, but I do not have the measurements (3*3mm square, 12mm long?)

Best regards
Helge
  Reply With Quote
Old 3rd July 2014, 11:13 AM   #7
AndrewT is offline AndrewT  Scotland
diyAudio Member
 
Join Date: Jul 2004
Location: Scottish Borders
Use a 75 coax from a 75ohm aerial into the 75ohm socket.
__________________
regards Andrew T.
  Reply With Quote
Old 3rd July 2014, 11:49 AM   #8
diyAudio Member
 
Join Date: Jul 2014
Dear Andrew T,

My radio do not have a 75 Ohm socket, but a 300 Ohm scoket which require a DIN451316 plug.

Best regards

Helge
  Reply With Quote
Old 3rd July 2014, 02:01 PM   #9
AndrewT is offline AndrewT  Scotland
diyAudio Member
 
Join Date: Jul 2004
Location: Scottish Borders
Have a look inside and see if there is a 75ohm input.

If not, then what about adding a 300ohm to 75 ohm balun, to take a conventional 75ohm coax?
__________________
regards Andrew T.
  Reply With Quote
Old 3rd July 2014, 02:35 PM   #10
diyAudio Member
 
Join Date: Jul 2014
Hello Andrew,

There is no 75 Ohm input, it is an old B&O receiver.

Even with a 75 Ohm balun I will still need the DIN45316 plug.

Another point is that I don't intend to change this old time receiver from end 1960's

Best regards

Helge
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
RCA OUT & IEC from QUAD 99CD PLAYER ? rubydac Digital Source 3 30th December 2009 06:56 AM
For sale: Quad FM3 tuner, $175 gaetan8888 Swap Meet 0 23rd September 2008 02:49 AM
SimpleSE - Switches, Wire, IEC, Jacks Zap Tubes / Valves 5 26th February 2008 07:49 PM
Where to get IEC Chassis Plug? ervington Parts 12 4th October 2006 03:14 PM
chassis-mounted filter or IEC plug filter jarthel Solid State 7 11th March 2002 10:17 AM


New To Site? Need Help?

All times are GMT. The time now is 04:13 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2