Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc.

Help! RB250 rewiring - hum problem
Help! RB250 rewiring - hum problem
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 27th January 2010, 06:27 AM   #1
zhaloe is offline zhaloe
diyAudio Member
Join Date: Jan 2010
Unhappy Help! RB250 rewiring - hum problem


I just done rewiring my RB250 (NAD533 table) but getting a louder hum, even if the deck off.
Rewiring DIY style, continuous rewire but still using original small PCB as post connection. For separate ground wire I drilled a 1.0mm hole at the back of arm tube and new ground wire gets soldered to brass plug in hole. I think this prefect ground point, is it correct??
Internal wire is 32AWG and external cable 22AWG, cardas clips and gold plated RCA. After checked that everything soldered into place and take multi meter found no leak wire also ground wire attached to preamp, now start play music. But..oh nooo....heard louder huummm from both channels.
Try to detach cart clips and deck power off/power cord connected, switched preamp/amp on and still hear louder hum.

Any advice would be appreciated.

Best regards,
  Reply With Quote


Help! RB250 rewiring - hum problemHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
RB250 Rewiring - accidental mess up? InfiniteGain Analogue Source 5 30th January 2009 11:11 PM
Rewiring a Rega RB250 serse Analogue Source 54 20th August 2008 10:53 AM
Rewiring tonearm without hum? tmblack Analogue Source 12 1st March 2005 04:36 AM
Help with hum small hum problem... Guiness Tubes / Valves 10 5th May 2003 05:23 PM

New To Site? Need Help?

All times are GMT. The time now is 03:14 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio