How to remove Rega RB 300 counterweight extension

northernsky · 13th December 2009, 08:13 PM

Hi,

I am trying to unscrew without success the Rega RB300 counterweight silver extension to rewire it by Incognito rewiring kit and according to the instruction manual.

Is there here somebody who found the same problem and can tell how solved it?

Thank you

Renato

d to the g · 13th December 2009, 08:45 PM

Sometimes they use a dab of glue to hold the counterweight stub on. I've heard that some people have had to use a wrench (with a cloth between it and the stub) while holding the arm in their hand. BE VERY CAREFUL NOT TO TORQUE THE BEARINGS.

northernsky · 14th December 2009, 02:48 PM

Thank you for your reply. I hope to not destroy the arm... A good reason to change turntable

Renato

13th December 2009, 08:13 PM	#1
northernsky diyAudio Member Join Date: Feb 2008	How to remove Rega RB 300 counterweight extension Hi, I am trying to unscrew without success the Rega RB300 counterweight silver extension to rewire it by Incognito rewiring kit and according to the instruction manual. Is there here somebody who found the same problem and can tell how solved it? Thank you Renato

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY counterweight/replacement	iamlost	Analogue Source	3	8th August 2009 03:16 AM
Solid or viscous tonearm counterweight?	Conrad Hoffman	Analogue Source	3	7th January 2009 11:40 PM
What RB250/RB300 counterweight mod?	Shaun	Analogue Source	12	11th November 2008 05:29 AM
Kerry F2-Titanium H/W counterweight DIY>?	StylinLP	Analogue Source	0	6th May 2008 08:45 PM
Wanted: 1901/LWR counterweight for SME 3009 Improved	virak	Swap Meet	0	16th January 2007 01:36 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

13th December 2009, 08:45 PM	#2
d to the g diyAudio Member Join Date: Aug 2006 Location: minimalopolis	Sometimes they use a dab of glue to hold the counterweight stub on. I've heard that some people have had to use a wrench (with a cloth between it and the stub) while holding the arm in their hand. BE VERY CAREFUL NOT TO TORQUE THE BEARINGS.

14th December 2009, 02:48 PM	#3
northernsky diyAudio Member Join Date: Feb 2008	Thank you for your reply. I hope to not destroy the arm... A good reason to change turntable Renato

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)