diyAudio - How to remove Rega RB 300 counterweight extension

diyAudio (http://www.diyaudio.com/forums/)

- Analogue Source (http://www.diyaudio.com/forums/analogue-source/)

- - How to remove Rega RB 300 counterweight extension (http://www.diyaudio.com/forums/analogue-source/156714-how-remove-rega-rb-300-counterweight-extension.html)

northernsky

13th December 2009 08:13 PM

How to remove Rega RB 300 counterweight extension

Hi,

I am trying to unscrew without success the Rega RB300 counterweight silver extension to rewire it by Incognito rewiring kit and according to the instruction manual.

Is there here somebody who found the same problem and can tell how solved it?

Thank you

Renato

d to the g

13th December 2009 08:45 PM

Sometimes they use a dab of glue to hold the counterweight stub on. I've heard that some people have had to use a wrench (with a cloth between it and the stub) while holding the arm in their hand. BE VERY CAREFUL NOT TO TORQUE THE BEARINGS.

northernsky

14th December 2009 02:48 PM

Thank you for your reply. I hope to not destroy the arm... A good reason to change turntable

Renato

All times are GMT. The time now is 02:25 PM.