diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Analogue Source (http://www.diyaudio.com/forums/analogue-source/)
-   -   Bought myself a Dual 510, how do take apart? (http://www.diyaudio.com/forums/analogue-source/156524-bought-myself-dual-510-how-do-take-apart.html)

CJ900RR 10th December 2009 06:35 AM

Bought myself a Dual 510, how do take apart?
 
Well, my girlfriend actually surprised me with a Dual 510 in mint condition, it looks like it brand new. For the $23 (17 Euro) that she paid it seems like a bargain :D The only problem was that only one channel worked, and the shaft for lifting/lowering the tone-arm was missing. One cable in one of the RCA contacts where loose, I re-soldered that and now it plays on both channel.

But, I suspect that the missing shaft is inside the player, cause something is loose when I move the player around. How do I disassemble the player? There is 5 screws in the bottom plate, but it wont come loose when I unscrew them. It seems to be some (30 or so) metal "clamps" holding the plate to the chassi. Should I remove them to? Or can I release the feather suspended player from the sub-chassi somehow?

I don't want to play around to much in case I destroy something!

Zen Mod 10th December 2009 09:03 AM

look at Vinyl Engine , if nobody answers here .


All times are GMT. The time now is 12:08 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2