Mpp - Page 715

FdW · 1st September 2012, 09:42 PM

Quote:

Originally Posted by Joachim Gerhard

This will be the speakers, a so far non commercial experiment by Andres.
The driver is a Visaton B200. I am currently working on a wideband driver that shall compete with the Visaton.

I remember those, smoking (and then we all payed).

Joachim Gerhard · 1st September 2012, 10:00 PM

Yes, one driver was fryed on the Frickelfest by a digital amp that went beserk. After a collect Andres got enough money to buy a new one.

Benedetto · 2nd September 2012, 10:17 AM

Mercury rectifier needed ?

RCruz · 2nd September 2012, 10:18 AM

Wonderfull news.... I love Krefeld and also Duisburg.

I also like reed tonearms... never heard about the russian tube amps.

What cart will you be using ?

As for the speakers, I already read about them... Splendid work Andres

Holger Barske · 2nd September 2012, 12:50 PM

Although I am sure this has been asked and answered several times before - have mercy, I don't wanna skim the whole thread:

How much current will one channel of Paradise R3 draw (per rail)?

FdW · 2nd September 2012, 01:46 PM

Quote:

Originally Posted by Holger Barske

Although I am sure this has been asked and answered several times before - have mercy, I don't wanna skim the whole thread:

How much current will one channel of Paradise R3 draw (per rail)?

According to my notes it is about 80mA (the CCS is set to 110mA).

RCruz · 2nd September 2012, 02:29 PM

So total current consumption will be 160mA right ?

Joachim Gerhard · 2nd September 2012, 02:56 PM

Andres will bring an unusual cartridge. It has only 0.25mV output and 65 Ohm. That is because the windings of the coils are not on magnetic material and the magnet is far from the coils. A tough combination. I hope it works with the Paradise.
One advantage of that cartridge is very high channel separation to high frequencies, at least that was told to me.

Holger Barske · 2nd September 2012, 03:10 PM

Quote:

Originally Posted by RCruz

So total current consumption will be 160mA right ?

No. 110 mA. The 50 mA "overshoot" will be burnt by the shunt reg.

RCruz · 2nd September 2012, 06:17 PM

Quote:

Originally Posted by Holger Barske

No. 110 mA. The 50 mA "overshoot" will be burnt by the shunt reg.

???

80mA per side(+-)... each channel has two shunts running at 110mA

I believe total shunt consumption will be 220mA per channel but each channel amp needs 2 x 80mA to operate right ?

In each side(+-) the shunts will dissipate 30mA more than the 80mA needed right ?

2nd September 2012, 10:18 AM	#7144
RCruz diyAudio Member Join Date: Sep 2006 Location: Saxon Blog Entries: 1	Wonderfull news.... I love Krefeld and also Duisburg. I also like reed tonearms... never heard about the russian tube amps. What cart will you be using ? As for the speakers, I already read about them... Splendid work Andres __________________ RC

2nd September 2012, 12:50 PM	#7145
Holger Barske diyAudio Member Join Date: Jan 2001 Location: Ruhrgebiet	Although I am sure this has been asked and answered several times before - have mercy, I don't wanna skim the whole thread: How much current will one channel of Paradise R3 draw (per rail)? __________________ Best regards: Holger www.holgerbarske.com - Deutschsprachiges Paradise-Support-Forum

2nd September 2012, 02:29 PM	#7147
RCruz diyAudio Member Join Date: Sep 2006 Location: Saxon Blog Entries: 1	So total current consumption will be 160mA right ? __________________ RC

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

1st September 2012, 10:00 PM	#7142
Joachim Gerhard diyAudio Member Join Date: Mar 2009	Yes, one driver was fryed on the Frickelfest by a digital amp that went beserk. After a collect Andres got enough money to buy a new one.

2nd September 2012, 02:56 PM	#7148
Joachim Gerhard diyAudio Member Join Date: Mar 2009	Andres will bring an unusual cartridge. It has only 0.25mV output and 65 Ohm. That is because the windings of the coils are not on magnetic material and the magnet is far from the coils. A tough combination. I hope it works with the Paradise. One advantage of that cartridge is very high channel separation to high frequencies, at least that was told to me.