Mpp - Page 328

Joachim Gerhard · 4th December 2011, 06:01 PM

Seems to be that this circuit was already discussed in 2009 and Edmond Stuart has simulated it. See the Blowtorch thread.
Common mode linearized input stage and amplifier topology - Patent # 6963244 - PatentGenius

MiiB · 08:17 PM

Have now been going through the BT thread, and did not find any sims,
I think that the that340 with matched dual npn-pnp could be the medicine if that kind og input is to be explorred

Joachim Gerhard · 09:15 PM

No, that was in 2009 as far as i know. I found this interesting, but this is not important at the moment. I have enough to do.
Just today. I wanted to try out the MM stage of the Tanzmusik. I had visited Fink Consulting some time ago and Karl-Heinz gave my an AT95E. He said something like "it is so good that i do sometimes not know what the fuzz is about expensive MC´s". That is strong medicine but i was curious enough to try it out. I put it in my Goldring table that is the cheapest REGA with a wooden platter. It is somewhat modified but this again is not important. The sound i got really surprised me. In a very wide midrange everything is fine. The stage is wide, deep and high. At the extremes of the spectrum there is some loss of grip and punch in the bass and the upper treble is extended enough but a little bit fuzzy. It does not sound as energetic or spontaneous as my reference table either but it is interesting and sweet enough to draw my attention. Fatigue is low too so there is no excuse any more not to try vinyl if you are bored by your crap DVD player. Buy a used REGA or restore a Lenco L75, put this marvel of a bargain in and you are set with maybe 150,-€.

Benedetto · 4th December 2011, 09:55 PM

Hallo Joachim,
so do yourself, and us, the favour and try it with the best tt you got.

And tell us anything about it.
Please

Joachim Gerhard · 4th December 2011, 10:05 PM

That makes no sense to me. Ones i have adjusted a cart in my Triplanar it is "holy" for at least two years. It is just too stressy to find the sweet spot and then loose it. Just smash your "Sparschwein" and buy that damn thing. I found it new on Ebay for 19,98€. If you do not like it i buy it back from you.

Audiofanatic · 4th December 2011, 10:09 PM

I'll take it from him

Audiofanatic

Joachim Gerhard · 4th December 2011, 10:16 PM

Thanks, then we are in a round about of the third kind.
Charles Altmann likes the cheaper AT91 even better, round needle you know.
The Altmann Phono Stage

Benedetto · 4th December 2011, 10:27 PM

Thanx Joachim, i've got at least one anytime.
Mount it in for many Friends.
Not one complained.

Joachim Gerhard · 4th December 2011, 10:41 PM

So you know.....

Joachim Gerhard · 4th December 2011, 10:51 PM

This is interesting .....
Website of Wayne Stegall - Distortion Cancelation

4th December 2011, 08:03 PM	#3272
MiiB diyAudio Member Join Date: May 2005 Location: Denmark	Have now been going through the BT thread, and did not find any sims, I think that the that340 with matched dual npn-pnp could be the medicine if that kind og input is to be explorred Last edited by MiiB; 4th December 2011 at 08:17 PM.

4th December 2011, 09:12 PM	#3273
Joachim Gerhard diyAudio Member Join Date: Mar 2009	No, that was in 2009 as far as i know. I found this interesting, but this is not important at the moment. I have enough to do. Just today. I wanted to try out the MM stage of the Tanzmusik. I had visited Fink Consulting some time ago and Karl-Heinz gave my an AT95E. He said something like "it is so good that i do sometimes not know what the fuzz is about expensive MC´s". That is strong medicine but i was curious enough to try it out. I put it in my Goldring table that is the cheapest REGA with a wooden platter. It is somewhat modified but this again is not important. The sound i got really surprised me. In a very wide midrange everything is fine. The stage is wide, deep and high. At the extremes of the spectrum there is some loss of grip and punch in the bass and the upper treble is extended enough but a little bit fuzzy. It does not sound as energetic or spontaneous as my reference table either but it is interesting and sweet enough to draw my attention. Fatigue is low too so there is no excuse any more not to try vinyl if you are bored by your crap DVD player. Buy a used REGA or restore a Lenco L75, put this marvel of a bargain in and you are set with maybe 150,-€. Last edited by Joachim Gerhard; 4th December 2011 at 09:15 PM.

4th December 2011, 10:09 PM	#3276
Audiofanatic diyAudio Member Join Date: Oct 2002 Location: The Netherlands, Utrecht	No Joachim I'll take it from him Audiofanatic __________________ Be nice to animals.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

4th December 2011, 06:01 PM	#3271
Joachim Gerhard diyAudio Member Join Date: Mar 2009	Seems to be that this circuit was already discussed in 2009 and Edmond Stuart has simulated it. See the Blowtorch thread. Common mode linearized input stage and amplifier topology - Patent # 6963244 - PatentGenius

4th December 2011, 09:55 PM	#3274
Benedetto diyAudio Member Join Date: Nov 2007 Location: Knifetown-Germoney	Hallo Joachim, so do yourself, and us, the favour and try it with the best tt you got. And tell us anything about it. Please

4th December 2011, 10:05 PM	#3275
Joachim Gerhard diyAudio Member Join Date: Mar 2009	That makes no sense to me. Ones i have adjusted a cart in my Triplanar it is "holy" for at least two years. It is just too stressy to find the sweet spot and then loose it. Just smash your "Sparschwein" and buy that damn thing. I found it new on Ebay for 19,98€. If you do not like it i buy it back from you.

4th December 2011, 10:16 PM	#3277
Joachim Gerhard diyAudio Member Join Date: Mar 2009	Thanks, then we are in a round about of the third kind. Charles Altmann likes the cheaper AT91 even better, round needle you know. The Altmann Phono Stage

4th December 2011, 10:27 PM	#3278
Benedetto diyAudio Member Join Date: Nov 2007 Location: Knifetown-Germoney	Thanx Joachim, i've got at least one anytime. Mount it in for many Friends. Not one complained.

4th December 2011, 10:41 PM	#3279
Joachim Gerhard diyAudio Member Join Date: Mar 2009	So you know.....

4th December 2011, 10:51 PM	#3280
Joachim Gerhard diyAudio Member Join Date: Mar 2009	This is interesting ..... Website of Wayne Stegall - Distortion Cancelation