HELP ZETA-ARM bearing

GIPIONE · 9th October 2009, 06:59 AM

HELP ZETA-ARM bearing

Same of you have change the bearing of e zeta-arm??
Its movement is perfect ti up-down but the movement lateral isn’t easy, sweet and I think necessary to change the bearing
Here are 3 bearing in the up, and the same number in support point underneath, and this is very difficult ( o impossible ??) to open this. The up cylinder-screw where there is the 3 bearing is easy to open and change, bat the under, that think of same typos, I don’t know how use??
Now I have buy ceramic bearing for substitute ( 1/10” ) and I hope to make and obrtain a good work.
Help same of you have already do it??

Thank and best regards.

G.pietro
Italy-Treviso

Curly Woods · 9th October 2009, 06:41 PM

Contact Mike Harris of the Moth Group in England. he should be able to assist you with your Zeta issues.

http://www.britishaudio.co.uk/aboutus.htm

hifidaddy · 13th October 2009, 09:48 AM

http://www.Audioorigamo.com (he is even present here in the forum) is doing repairs on the Zeta, as well as two tonearm specialist in Germany.

Years ago, I did such myself, but I have no longer time to repair stuff from others.

best regards, Hartmut

Curly Woods · 13th October 2009, 12:26 PM

Quote:

Originally Posted by hifidaddy

http://www.Audioorigamo.com (he is even present here in the forum) is doing repairs on the Zeta, as well as two tonearm specialist in Germany.

Years ago, I did such myself, but I have no longer time to repair stuff from others.

best regards, Hartmut

Hartmut,

The link appears to be bad.

GIPIONE · 14th October 2009, 11:40 AM

Thank for the answer, and pardon for later of my.
Now I hope to repair myself the arm; mrs. Harris I know form same years and think contact immediately .
New thank

G.pietro
TREVISO-ITALY

Curly Woods · 14th October 2009, 12:33 PM

You are most welcome

Best of luck with your Zeta. It has always been a favorite of mine!

offanonone · 15th October 2009, 12:20 PM

Try this link for Audio Origami

Audio Origami - Everything from custom-made Tone Arms, Arm Rewires, Turntable set-ups, Custom Speaker parts and High Quality Cables, Terminals and Special extra slippery Bearing Oils and Pure Damper Oils.

John.

9th October 2009, 06:59 AM	#1
GIPIONE diyAudio Member Join Date: Apr 2005 Location: TREVISO	HELP ZETA-ARM bearing HELP ZETA-ARM bearing Same of you have change the bearing of e zeta-arm?? Its movement is perfect ti up-down but the movement lateral isn’t easy, sweet and I think necessary to change the bearing Here are 3 bearing in the up, and the same number in support point underneath, and this is very difficult ( o impossible ??) to open this. The up cylinder-screw where there is the 3 bearing is easy to open and change, bat the under, that think of same typos, I don’t know how use?? Now I have buy ceramic bearing for substitute ( 1/10” ) and I hope to make and obrtain a good work. Help same of you have already do it?? Thank and best regards. G.pietro Italy-Treviso

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Zeta Tonearm pin configuration	johnandchris	Analogue Source	5	7th March 2009 03:40 AM
the ZETA by lars	hienrich	Solid State	10	20th October 2007 01:47 AM
zeta 500 watts n-channel amp pcb need	ashokavarthanan	Solid State	0	1st October 2007 04:10 PM
Zeta 320 and Zeta2	mike.m216	Solid State	0	25th June 2006 08:49 AM
LCAudio Zeta Amplifier	SuperAudioBuff	Solid State	2	20th January 2005 12:13 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

9th October 2009, 06:41 PM	#2
Curly Woods Banned Join Date: Nov 2005 Location: McKinney, TX	Contact Mike Harris of the Moth Group in England. he should be able to assist you with your Zeta issues. http://www.britishaudio.co.uk/aboutus.htm

13th October 2009, 09:48 AM	#3
hifidaddy diyAudio Member Join Date: Oct 2001 Location: Munich, Germany	http://www.Audioorigamo.com (he is even present here in the forum) is doing repairs on the Zeta, as well as two tonearm specialist in Germany. Years ago, I did such myself, but I have no longer time to repair stuff from others. best regards, Hartmut

14th October 2009, 11:40 AM	#5
GIPIONE diyAudio Member Join Date: Apr 2005 Location: TREVISO	Thank for the answer, and pardon for later of my. Now I hope to repair myself the arm; mrs. Harris I know form same years and think contact immediately . New thank G.pietro TREVISO-ITALY

14th October 2009, 12:33 PM	#6
Curly Woods Banned Join Date: Nov 2005 Location: McKinney, TX	You are most welcome Best of luck with your Zeta. It has always been a favorite of mine!

15th October 2009, 12:20 PM	#7
offanonone diyAudio Member Join Date: Aug 2005	Try this link for Audio Origami Audio Origami - Everything from custom-made Tone Arms, Arm Rewires, Turntable set-ups, Custom Speaker parts and High Quality Cables, Terminals and Special extra slippery Bearing Oils and Pure Damper Oils. John.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)