|Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc.|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|8th July 2009, 07:21 PM||#1|
Join Date: May 2009
turntable spindle bushing source
excuse my ignorance and lack of proper terminology - all makes sense in my head anyway.
DIY table, using the platter from an Empire 598.
The bushing the spindle sits in on this unit is press fitted and I do not want to screw it up trying to get it out so I can always return the table back to it's original form.
Been googling around trying to find a bushing that would work for this. The spindle itself is exactly .508 (I knew my caliper would come in handy some day). The length of it is 3".
Now I admit I have no idea what I am looking for, but I do know what I want -
everything I see is an open bushing, not one that would work for sitting the spindle in, fro mreading around here I am taking a ceramic bottom that it rests on?
Where do you find these at ?
or any other idea? The spindle is fitted into the table and not messing with it as it is about as balanced as can be....
I apologize for my ignorance ahead of time....
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Turntable spindle sizes||Alter Ego||Analogue Source||6||19th April 2009 04:18 AM|
|Source for CDM 4 Spindle Motor||auric||Digital Source||1||13th November 2008 04:48 PM|
|Air Bearing Spindle DD Turntable||monsieurphot||Analogue Source||18||12th April 2008 08:05 AM|
|Turntable motor spindle is slightly bent...||Lonestar||Analogue Source||7||25th February 2008 08:30 PM|
|Luxman loadfree spindle turntable PD441||ericihli||Swap Meet||0||10th June 2005 01:15 AM|
|New To Site?||Need Help?|