|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
1st March 2009, 12:06 AM
|
#1 |
|
diyAudio Member
Join Date: Feb 2009
|
Linn Axis PSU smoking
Hi,
This is my first post but you have to start somewhere! I know this problem has come up time and again but I would be very grateful for any help out there. I have an Axis PSU which has stopped working. The first thing I noticed was the 2 main power resistors R2 and R3 had burnt out. I replaced these to find R1 starting to smoke and burn out so I replaced this along with D1 and all the largest capacitors (as recommended on other forums) However as soon as I switch it on now R1 starts to smoke so I turn it off straight away. I have checked the 4 main power transistors and they all seem to be ok. Now I am at a loose end as what to do without replacing every other component on the board. Any suggestions would be very much appreciated, thankyou, martiny |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Linn Axis psu almost fixed (i think!) | martiny | Analogue Source | 0 | 4th March 2009 03:14 PM |
| R2 and R3 values on Linn Axis PSU | martiny | Analogue Source | 3 | 4th March 2009 10:46 AM |
| Linn Axis Schematic | beamish | Analogue Source | 5 | 25th May 2008 02:03 PM |
| My Linn Axis is Sick. Please help fix | bubbamc119 | Analogue Source | 53 | 26th January 2008 12:08 AM |
| Repairs to Linn axis turntable | charlesrobinson | Everything Else | 1 | 13th July 2007 05:01 PM |
| New To Site? | Need Help? |
| Page generated in 0.06190 seconds (67.48% PHP - 32.52% MySQL) with 10 queries |
