hi output MC=too little gain. hi output MC=too little gain. - diyAudio
Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc.

hi output MC=too little gain.
hi output MC=too little gain.
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 23rd February 2009, 06:47 PM   #1
pfcs49 is offline pfcs49  United States
diyAudio Member
Join Date: Nov 2007
Location: NW NJ USA
Default hi output MC=too little gain.

Using Adcom hi output crosscoil MC VDHII cart OR Bang&Olufsen MMC-1 thru Yamaha C2-x preamp/Krell FPB 300/B&W 801Ns, not enough gain thru MM input.
Can turn volume up fully and, although it's pretty loud, it's nowhere as loud as it could/should be. I've installed 10db attenuaters to Tuner & CD to keep all input levels nearer to each other.
Adcom is 2.3mv@5cm/s, MMC-1 is 2.12mv@5cm/s, however MMC is slightly louder despite lower rated output. If I run the Adcom hi output MC thru the MC input in the pre and engage the -10db phono swx, it sounds pretty good w/1K ohm loading selected, but is now too loud + my second TT is hopelessly weak in MM input (-10db swx in rear of pre affects all phono inputs). I need more gain, but i don't want a complicated solution to running 2 low ouput turntables. Phil
  Reply With Quote


hi output MC=too little gain.Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
How to calculate gain and output impedance? RogerGustavsson Solid State 1 7th June 2008 05:09 PM
Gain Matching Output device ???'s Zero Cool Everything Else 6 10th December 2006 04:56 PM
Output stage with gain rtarbell Solid State 18 27th October 2006 07:15 PM
About output pot. value and gain on BoZoS.. Buhl Pass Labs 3 12th June 2006 10:01 PM

New To Site? Need Help?

All times are GMT. The time now is 10:45 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio