|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
4th January 2009, 11:44 PM
|
#1 |
|
diyAudio Member
Join Date: Jan 2009
|
looking for pinch roller - Sony TC-KE500S
I haven't used my TC-KE500S cassette deck in a while. I just tried playing a cassette but heard a crinkling noise. The transport was damaging my tape.
 I tried another tape. Same result. Fortunately it didn't eat the tape!I checked the capstan and pinch roller and both were clean. I cleaned them anyway but it didn't make a difference. Two possibilities occur to me: a bad pinch roller or an alignment issue. I don't have access to a mirror cassette. The roller appears glazed so I figure that's the likely cause. It measures 12.8 mm x 7mm. The hub is 7.9mm wide with 2mm hole for the axle. An Internet search turned up Studio Sound Electronics but they don't list that size. Referrals to other online sources would be appreciated! |
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| A&b-systems Roller Feet | A&B-SYSTEMS | Vendor's Bazaar | 11 | 30th April 2009 02:01 PM |
| Mylar roller buy, what is a real uses ??? | pmscompany | Planars & Exotics | 16 | 12th July 2006 06:54 AM |
| clean your pinch roller... with gasoline! | Sir Trefor | Analogue Source | 3 | 17th May 2005 04:39 AM |
| New To Site? | Need Help? |
