diyAudio (
-   Analogue Source (
-   -   Teac 3300 2t (

harwoodspark 2nd January 2009 09:24 PM

Teac 3300 2t
My TEAC isn't working. It powers up but I can't get it to run. I suspect it's because there's meant to be a plug in the 11 pin socket on the back of the unit. Can anyone confirm this and does anyone have one they don't need anymore and can sell me? Alternatively can anyone tell me which pins to short so I can get it running. Maybe someone has a spare remote unit for sale?



happycat 4th January 2009 08:36 AM

have you checked the capstan belt?

harwoodspark 4th January 2009 07:34 PM

Hi. The belt is ok. The deck powers up and the capstan runs fine but the solenoid controls are not functioning. There is an eleven pin socket on the rear where the corded remote plugs in. There should be a plug to go in here when the remote is not in use. Mine is missing and I think this is the cause of the problem.

Thanks anyway,


All times are GMT. The time now is 06:53 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 18.75%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio