request for Ariston RD11 E/RB250 armboard

drec · 27th December 2008, 06:44 PM

Hi there,

I do not have any proper workshop tools and would like to have a simple mdf armboard made to fit a modded RB250 onto an Ariston RD11 E. The dimensions are 87mm diameter with 23mm hole, 10mm thick.

I would of course pay for materials and labour, as well as delivery via Paypal.

Thanks,
Andre from near Toronto

atavid · 31st December 2008, 05:40 AM

Why dont you just go to a sign makers shop and have them cut you one out of 10mm thick acrylic in a colour of your choice.Ive done this a couple of times now for my Ariston and they look great and sound good.Cost me about $30AUS to get all the holes cut to size,polished and screw attaching holes countersunk.Better finish than the original piece of crap nylon.

27th December 2008, 06:44 PM	#1
drec diyAudio Member Join Date: Nov 2006	request for Ariston RD11 E/RB250 armboard Hi there, I do not have any proper workshop tools and would like to have a simple mdf armboard made to fit a modded RB250 onto an Ariston RD11 E. The dimensions are 87mm diameter with 23mm hole, 10mm thick. I would of course pay for materials and labour, as well as delivery via Paypal. Thanks, Andre from near Toronto

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ariston RD11, Linn Vector-like DIY	bonzini	Analogue Source	96	17th April 2010 08:30 PM
Ariston RD11 with Discovery RB250... armboard? and weight/suspension question	drec	Analogue Source	13	8th October 2008 02:48 AM
armboard experimentation	YNWOAN	Analogue Source	2	4th April 2008 12:18 PM
Need help on LINN armboard	NickBRN	Analogue Source	21	15th July 2007 08:20 AM
SME model 10 Armboard cut?	ericpeters	Analogue Source	0	21st December 2004 03:35 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

31st December 2008, 05:40 AM	#2
atavid diyAudio Member Join Date: Oct 2007	Why dont you just go to a sign makers shop and have them cut you one out of 10mm thick acrylic in a colour of your choice.Ive done this a couple of times now for my Ariston and they look great and sound good.Cost me about $30AUS to get all the holes cut to size,polished and screw attaching holes countersunk.Better finish than the original piece of crap nylon.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)